Gears & Axles Driveshafts | Rearends | Differentials | Gears | 12 Bolt | 9 Inch | Dana

Ring and Pinion gear questions and other questions

Thread Tools
 
Search this Thread
 
Old 12-17-2014, 07:07 AM
  #1  
Teching In
Thread Starter
 
mike3800's Avatar
 
Join Date: Jun 2014
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default Ring and Pinion gear questions and other questions

I have a 2002 Trans Am and it currently has 3.23 gears in the rear end. The car is 4 speed auto. The car is only street driven and sees some highway use. Will going to 3.73 gears affect driveability a lot?

Next questions. My old lady has a 6 speed '99 Camaro SS. It is mildy modded with 3.73 gears, SLP air box lid, Tube by Frost, Speed Engineering headers, offroad y pipe back to Flow Master exhaust and an LS6 intake manifold. All my WS6 has right now is long tube headers. My car has to be faster than hers. I want to do the same mods her cars has, minus the ls6 intake since its there already. I will probably add a mild cam and bigger throttle body. Should this be enough to make my car faster than hers? I just got my car a week ago and she is already talking **** cause her car is faster.
Old 12-17-2014, 07:24 AM
  #2  
11 Second Club
iTrader: (2)
 
scotty2000ss's Avatar
 
Join Date: Jun 2014
Location: Roseville, CA
Posts: 2,090
Received 3 Likes on 3 Posts
Default

What's your time frame and budget?
Old 12-17-2014, 11:32 AM
  #3  
TECH Apprentice
 
fbody4everyone's Avatar
 
Join Date: Oct 2014
Location: Iowa
Posts: 308
Likes: 0
Received 0 Likes on 0 Posts
Default

There have been great gains with cam only. An eps cam is well known to work with stock ls1 parts without heads if your budget is a factor. But it'd really bring it to life with your headers. just a start ^
Old 12-17-2014, 01:38 PM
  #4  
11 Second Club
iTrader: (2)
 
scotty2000ss's Avatar
 
Join Date: Jun 2014
Location: Roseville, CA
Posts: 2,090
Received 3 Likes on 3 Posts
Default

I'd say gears would net you the most inexpensive gain on your old lady. I would do that first.
Old 12-17-2014, 02:26 PM
  #5  
Teching In
Thread Starter
 
mike3800's Avatar
 
Join Date: Jun 2014
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default

Theres not really a time frame or budget in mind. I don't want to do any headwork or anything like that. I want to keep the car mildly modded. I did a little reading about the eps cam and that's the one I had in mind. Her car wont be getting modded any more, so once Im faster, Im good.

How much does tuning affect downshifting in the auto trans? It feels like the car takes forever to downshift when I get on the gas hard. Almost like the computer needs to think about what it wants to do. I don't think its a tranny problem since everything else with the transmission works perfectly otherwise.
Old 12-17-2014, 04:55 PM
  #6  
Launching!
 
DirtyBirdMKE's Avatar
 
Join Date: Oct 2012
Posts: 287
Likes: 0
Received 2 Likes on 1 Post
Default

gears and a stall.... get the speed engineering 1-7/8ths and a tsp TDs...

grab yourself a lid and a 228r cam and race her for sexual favors
Old 12-17-2014, 05:19 PM
  #7  
Teching In
Thread Starter
 
mike3800's Avatar
 
Join Date: Jun 2014
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default

Whats a tsp TDs?
Old 12-17-2014, 05:43 PM
  #8  
TECH Veteran
iTrader: (4)
 
FirstYrLS1Z's Avatar
 
Join Date: Aug 2004
Location: Euclid,Ohio
Posts: 4,159
Received 134 Likes on 118 Posts

Default

do you wanna be faster from a dig OR faster from a roll ???
Old 12-18-2014, 02:44 PM
  #9  
Teching In
Thread Starter
 
mike3800's Avatar
 
Join Date: Jun 2014
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default

I want both. I think Im going to steal her SLP airbox lid and put my stock airbox on her car. She will never know.
Old 12-19-2014, 09:55 AM
  #10  
TECH Addict
iTrader: (1)
 
JohnnyBs98WS6Rag's Avatar
 
Join Date: Jul 2005
Location: NE Indiana
Posts: 2,204
Received 204 Likes on 162 Posts

Default

Originally Posted by mike3800
I want both. I think Im going to steal her SLP airbox lid and put my stock airbox on her car. She will never know.
Uh, how old is your "old lady"? If she's not really old, I'd think twice before burning that bridge. Lids aren't that expensive.

Old 12-19-2014, 12:41 PM
  #11  
Teching In
Thread Starter
 
mike3800's Avatar
 
Join Date: Jun 2014
Posts: 18
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by JohnnyBs98WS6Rag
Uh, how old is your "old lady"? If she's not really old, I'd think twice before burning that bridge. Lids aren't that expensive.

Lol. Shes not that old. 32, but I doubt she knows what a lid is or that its even there.
Old 12-20-2014, 05:02 PM
  #12  
12 Second Club
 
dailydriver's Avatar
 
Join Date: Sep 2005
Location: Bucks County, Pa.
Posts: 4,273
Likes: 0
Received 0 Likes on 0 Posts

Default

Which car is more loaded up with options, or are they the same?? (In other words WEIGHT differences.)

The WS6 TAs are a little heavier, even given similar options, if I remember correctly, due to more bodywork, and more standard 'conveniences'.



Quick Reply: Ring and Pinion gear questions and other questions



All times are GMT -5. The time now is 02:03 PM.