Any reviews on quick performance rear ?
#1
On The Tree
Thread Starter
Any reviews on quick performance rear ?
Thinking about going with a quick performance 9 in. Rear not trying to break the bank anybody have experience with them ?
#6
I've had a quick performance rear-end under the car for about 3 years now. If I could do it all over again, I would go with something else. The rear end it's self looks good, but I feel the mounting geometry isn't 100% spec. Also the torque arm mounting "system" is huge. It takes up a ton of space and fitting an aftermarket torque arm down there is next to impossible without cutting the floor up. The mounting system and torque arm location doesn't allow for much travel and smacks the **** outta the floor on hard bumps. Also the pinion yoke does sit in approximately the same place as factory. Not 2 inches further back like most other 9"s so that may be a reason it fits poorly. There is no way to locate it further back. Imo don't compromise. Do it once, do it right the first time.
#7
LS1Tech Premium Sponsor
iTrader: (5)
We have one of the finest 9'' rearends on the market and are in some of the fastest stock suspension cars in the country and 100's of street driven cars without issues. If you have any questions about our product please give us a call or pm me on here and I will answer any and all questions you might have.
Last edited by MidwestChassis; 02-16-2017 at 09:34 AM.
Trending Topics
#8
LS1Tech Sponsor
iTrader: (16)
Wow, 98cherrySS just got banned! Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#10
LS1Tech Sponsor
iTrader: (16)
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#11
6 Second Club Moderator
iTrader: (7)
Join Date: Sep 2002
Location: Lombard .IL
Posts: 3,682
Likes: 0
Received 0 Likes
on
0 Posts
Yes Bob , very observant! I've had several conversations about bashing and feedback with him. He must have thought I was kidding. One can read LS1Tech rules on bashing-feedback, if there's any questions or pm me.
Andy
Now lets go back to the original thread topic.
Andy
Now lets go back to the original thread topic.
#12
LS1Tech Sponsor
iTrader: (16)
Sarcasm, really! Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
#14
TECH Senior Member
iTrader: (96)
Join Date: Aug 2007
Location: Turnin' Wrenches Infractions: 005
Posts: 24,241
Likes: 0
Received 81 Likes
on
72 Posts
Honestly, I will give you my experienced take. You do have some solid sponsors here that are very good at what they do, I've done business with almost all of them, example: I have a PST driveshaft from Bob, a Strange 12 bolt from Carl @ CRP, and several suspension/brake components from MWC. They can provide you with everything some other retailer like Trick Chassis or QP can, and they are here supporting this site. It does kind of lean the advice towards these vendors.....Then, I guess when you have someone who continues to be negative, good vendors get tired of it, and rightfully so, I mean Im 100% sure they attempted to correct whatever the situation was. And so here we are, I dont think anyone wants to bash a non-supporting retailer, but lots won't lean towards them given the overall situation. I've never done business with QP/TC so I never comment personally on their quality/product, but I know there are people that have and there opinions are scattered here if you search.
#15
Cheers.