Need 3.90 gears
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Mar 2005
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
Need 3.90 gears
I've spent 20 minutes searching sites trying to find the 3.90 gears for the stock 10 bolt for $175 shipped. I've heard the price is out there; but, I can't find it. Send a PM with any help. I'm ready to buy.
#5
FormerVendor
iTrader: (2)
Join Date: Dec 2007
Location: Sacramento, California
Posts: 761
Likes: 0
Received 0 Likes
on
0 Posts
We have the 3.90 gears available on our website and they are in stock, ready to ship.
http://www.jawsgear.com/product_info...oducts_id=1762
Jeff
http://www.jawsgear.com/product_info...oducts_id=1762
Jeff
Trending Topics
#8
FormerVendor
iTrader: (2)
Join Date: Dec 2007
Location: Sacramento, California
Posts: 761
Likes: 0
Received 0 Likes
on
0 Posts
I would go with the Master Timken Kit, which includes the following.....
Includes: Pinion & Carrier Bearings and Races, Pinion Seal, Pinion & Carrier Shims, Pinion Nut, Crush Sleeve, Ring Gear Bolts (in most cases), Gasket or Silicone, Gear Marking Compound, Loctite, Brush.
Also, you need 2 quarts of oil and an additive if you have a clutch style posi.
Jeff
Includes: Pinion & Carrier Bearings and Races, Pinion Seal, Pinion & Carrier Shims, Pinion Nut, Crush Sleeve, Ring Gear Bolts (in most cases), Gasket or Silicone, Gear Marking Compound, Loctite, Brush.
Also, you need 2 quarts of oil and an additive if you have a clutch style posi.
Jeff
#9
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Mar 2005
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
I would go with the Master Timken Kit, which includes the following.....
Includes: Pinion & Carrier Bearings and Races, Pinion Seal, Pinion & Carrier Shims, Pinion Nut, Crush Sleeve, Ring Gear Bolts (in most cases), Gasket or Silicone, Gear Marking Compound, Loctite, Brush.
Also, you need 2 quarts of oil and an additive if you have a clutch style posi.
Jeff
Includes: Pinion & Carrier Bearings and Races, Pinion Seal, Pinion & Carrier Shims, Pinion Nut, Crush Sleeve, Ring Gear Bolts (in most cases), Gasket or Silicone, Gear Marking Compound, Loctite, Brush.
Also, you need 2 quarts of oil and an additive if you have a clutch style posi.
Jeff