Monster upgraded slave cylinders @ SDPC
#1
Monster upgraded slave cylinders @ SDPC
Preinstalled on the slave by SDPC when you buy a slave and the bearing support!
One of the best upgrades we've seen for the GM hydraulics in late model GM application is the Monster throwout bearing support. Eliminate a huge point of failure in your GM hydraulics with this upgrade, and you don't even have to install it yourself. If you buy a new GM slave from us and the Monster support at the same time, we will install the bearing support before shipping.
Couple this with any clutch of your choice, and you really can enjoy one stop shopping right here at SDPC. Just give us a call with your application and we will price the slave cylinder for your application. We do not get beat on price on genuine GM parts! The Monster support is $79.99 and we won't charge you for swapping it onto the slave before shipping it out.
Stock.
Tools Required.
Pull off the throwout bearing.
Gently pry off the retainer ring.
Remove it and sit it aside.
Monster's new billet support!
Replace the stock plastic support with the new Monster support.
Place the retainer back into place.
Tap it down to securely hold the slave together.
Put the T/O bearing back in place and it's ready for installation in the car.
One of the best upgrades we've seen for the GM hydraulics in late model GM application is the Monster throwout bearing support. Eliminate a huge point of failure in your GM hydraulics with this upgrade, and you don't even have to install it yourself. If you buy a new GM slave from us and the Monster support at the same time, we will install the bearing support before shipping.
Couple this with any clutch of your choice, and you really can enjoy one stop shopping right here at SDPC. Just give us a call with your application and we will price the slave cylinder for your application. We do not get beat on price on genuine GM parts! The Monster support is $79.99 and we won't charge you for swapping it onto the slave before shipping it out.
Stock.
Tools Required.
Pull off the throwout bearing.
Gently pry off the retainer ring.
Remove it and sit it aside.
Monster's new billet support!
Replace the stock plastic support with the new Monster support.
Place the retainer back into place.
Tap it down to securely hold the slave together.
Put the T/O bearing back in place and it's ready for installation in the car.
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
#4
The GTO and Fbody slaves are put togther differently with different parts, this is not applicable to them, no sir.
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
#5
To the top!
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
#7
The Z28 uses a different slave than the SS. It's abotu $20 less than an SS slave
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
Trending Topics
#8
12 Second Club
iTrader: (3)
Join Date: Sep 2003
Location: Lubbock, TX
Posts: 2,680
Likes: 0
Received 0 Likes
on
0 Posts
I lost the plastic bearing support on my own 2010 Camaro SS and made sure to get the Monster support when we put a new slave in a month ago, so that it would not happen again, especially since I was about to take the car on the long haul for Power Tour. Great upgrade to the factory slave and improves the reliability greatly.
#10
LS1TECH & TRUCKS Sponsor
Join Date: Apr 2013
Location: Lubbock
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Yes you can use the Monster bearing support in a 2015 Z28.
#12
To the top!
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
#13
LS1TECH & TRUCKS Sponsor
Join Date: Apr 2013
Location: Lubbock
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Any of you guys doing a clutch change give us a shout to get a Monster Bearing support upgrade so you wont have to chance getting into it again when it eats the stock plastic piece.
#14
Bump!
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
#15
To the top!
__________________
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice
800-456-0211 / PM / Facebook
WHIPPLE Superchargers, Procharger, Magnuson, Powerbond Sale, HPTuners packages!, Trickflow, AFR, PRC, CHE Trunion upgrade, $100 7.400" pushrod set, Custom Cam of your choice