firemech21

iTrader: (9)

I plan to seafoam my car this weekend along with a good MX/tune-up. Now the lasttime i seafoamed my T/A, all 4 O2 sensors crapped out. Has this happened to anyone else? I didnt get any smoke from my last car either. Now my new T/A, is in much better shape than the old one and only has 2 O2 sensors, but i still dont want the damn SES light to pop on like my last experience with SF. Any help or ideas would be great, thanks.

zachrywd_01TA

I dunno what to do differently.. But when I SF'd mine I just took the MAF off and sprayed directly into the intake. Everything seemed fine and happy when I was done.

If you're really that worried about fouling your O2's out, then don't do it I guess.

EW1

iTrader: (10)

Isn't there two products to seafoam your car. I know there is a liquid hat most people but in the oil and through a vacuum line, but isn't there an aerosol version now?

zachrywd_01TA

I used the Aerosol.

biggriff

iTrader: (3)

i used the liquid last month , in thru the brake boost vaccum no problems no codes...O2's are fine

http://www.youtube.com/watch?v=iMN-mGykxfQ

Element

iTrader: (5)

The spray can stuff is called Deep Creep...lot of people spray that into the intake and let it soak overnight, then do the normal Seafoam-through-the-booster deal.

joker59

When I used seafoam in the brake booster line it knocked out 1 O2 sensor. But the engine in my 98 z28 ran way better!

senicalj4579

iTrader: (41)

I cant prove it but iv had a couple sensors stop responding from engine cleaner. It was after the mccc not seafoam. But I seafoamed a week before I did the mccc so whos knows