FAST 92/92 on a stock internal LS1
#1
Restricted User
Thread Starter
iTrader: (21)
Join Date: Aug 2006
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
FAST 92/92 on a stock internal LS1
alright i have just a couple questions. for some reason the search isnt working. i have a stock head/internal 1998 LS1 and was curious if tossing on a FAST 92/92 with an 85mm MAF will whack out my engine too much on a stock tune. supporting mods include 1 3/4" LTs, ORY, SLP LM2, and MTI lid. i'll be running stock injectors and tune. would this be safe or just an incredibly lean timebomb?
#3
TECH Fanatic
iTrader: (9)
Join Date: Nov 2005
Location: Mass
Posts: 1,311
Likes: 0
Received 0 Likes
on
0 Posts
I've been tempted a few times to upgrade the MAF, probably don't need to though. Here's a good thread on it:
https://ls1tech.com/forums/generatio...onversion.html
If you plan to keep your engine internals stock you probably won't benefit much from the fast intake either.
https://ls1tech.com/forums/generatio...onversion.html
If you plan to keep your engine internals stock you probably won't benefit much from the fast intake either.
Last edited by massls1guy; 04-03-2009 at 12:53 PM. Reason: typo
#5
might wanna leave the ls6 intake on for a SI car, another member gained nothing going from a LS6 and ported TB to a Fast 90...
Last edited by chrs1313; 04-03-2009 at 04:37 PM.
#7
12 Second Club
iTrader: (4)
I gained 20+rwhp with gains accross the board, with my 6.0L swapping from an LS2 intake(For you massls1guy).
Since my results were so good my brother just bolted a FAST 92mm intake on his 100% stock 2000 Camaro and hes called me a few times from back home telling me how amazed he is with the new power.