A4 Mod's for bottom end torque
#1
On The Tree
Thread Starter
Join Date: Dec 2008
Location: southeast
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
A4 Mod's for bottom end torque
As stated what are the best mods for low end torque?
I always hear about increasing top end and I would rather get from 0 to 80 quick than going 150mph.
I always hear about increasing top end and I would rather get from 0 to 80 quick than going 150mph.
#4
TECH Fanatic
iTrader: (6)
Join Date: Nov 2001
Location: NV
Posts: 1,224
Likes: 0
Received 0 Likes
on
0 Posts
The real part about increasing top end is to have the car in the higher rpm that you're using. Going from 0 to 80 or 0 to 150 makes no difference. If you're going wot, you'll still be in the higher rpm's.
Low end torque is used for part throttle driving. The whole area under the curve debate. The more low end, supposedly the faster off the line.
What was suggested already in this thread is a good start.
Low end torque is used for part throttle driving. The whole area under the curve debate. The more low end, supposedly the faster off the line.
What was suggested already in this thread is a good start.
#7
On The Tree
Thread Starter
Join Date: Dec 2008
Location: southeast
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
I would take it to someone I have never fooled with autos.
4K sounds high for the street and there are no 1/4 mile strips around here just 1/8 and this does not intrezst me.
4K sounds high for the street and there are no 1/4 mile strips around here just 1/8 and this does not intrezst me.