FAST LS1

iTrader: (2)

Here's what I've compiled so far for both 2.5" and 3" aluminized mandrel bent duals. This is just a parts list since I'll be welding it up myself when I do it. I should also mention this would be dumping the duals right before the axle.

Pipe Diameter..2.5"...........3"
Husker X........$35..........$38.....
4ft of tubing...$11(2)......$14(2)..
Reducer.........$24..........none..
3 bolt flanges.$19...........$19(2)..
Hangers.........$7(2)........$7(2)..
Turndowns.....$17(2).......$19(2)..
Mandrel 45.....$10(2).......$21..(2)..?
Mandrel 180...$15...........$29..same link

total............$183..........$206..+S&H

Then you add in your choice of mufflers. I'm leaning towards 1 chamber flowmasters, or possibly Spintech's.

Flowmaster...$73(2).......$74(2)
total............$329.........$354..+S&H

Spintechs.....$100(2).....$100(2)
total............$383.........$406..+S&H

I looked at the universal kits and they didn't come out to be any cheaper.
I guess I just wanted to know if that looked about right or if I'm missing anything.

Edit: PM me if you want the whole list with links to all the parts I've listed.

WILWAXU

iTrader: (6)

well.. actually none of those links were sponsors. I fixed it for you

FAST LS1

iTrader: (2)

I know the Husker link has been posted before and thought that since none of the sponsors carry anything that really competes with the parts I listed the links would be ok Guess not.

SSEUL8R

Where can i look at spintechs?

jrp

iTrader: (16)

is this a new rule? i knew posting non sponsor links in on ls1.com wasnt allowed but from the time i've been here i have seen non sponsor links posted all the time. thanks for the heads up though

FAST LS1

iTrader: (2)

I have the link for spintech but I guess I can't post it since it's not a sponsor.

SSEUL8R

email it to me. biz302@aol.com

FAST LS1

iTrader: (2)

Screw it, it's not a hyperlink. not-a-sponsor.com

WILWAXU

iTrader: (6)

More than one of our sponsors sells the products in your listing, ether in kits or pieces.

New Rule? Posting of technical information is allways incourgaged, hence the reason I did not lock this thread. You can talk about any technical merits of any products, but you cannot post contact or pricing information. That's been the policy since day one.

This guy has the right idea. PM is also an option.

Posting of technical information is allways encourgaged, hence the reason I did not lock this thread. If you would like to continue posting not techinical and non-sponsor information, this post will be locked.

FAST LS1

iTrader: (2)

PM me if you want the whole list with links

MattB4C

iTrader: (1)

cam you pm me the list with the links? I'm looking into going with true duals also

Magnus

iTrader: (4)

drgas.com has a very complete kit that works very well. I have it on my car. Only took a little bit of fab work.

FAST LS1

iTrader: (2)

The drgas kit is a good deal if your not going to be doing all the work yourself, or just don't want the hassel of ordering all the parts individually. For about the same price as the drgas setup you can get everything, excluding mufflers, that you'll need if you order it all seperately. That includes hangers, turndowns, reducers, and the other set of 3-bolt flanges you'll need if your long tubes don't already have them welded on.

1 SIC Z

iTrader: (34)

can someone email the link to the Dr. Gas kit and part #s that are needed?
bad35th@yahoo.com
thanks

John