aerojt

iTrader: (4)

Well I put on an MSD starter while doing my tranny rebuild. The stock one looked pretty rough so while it was off I figured why not. Took a quick video, kinda tough to tell a difference but it really sounds different when starting. Neat part, quality was good and if you care I have a really shiny starter down there!

sjsingle1

iTrader: (1)

thats the first thing I noticed when I installed mine.......very different sound

aerojt

iTrader: (4)

Glad somebody out there knows what I'm talking about!

sjsingle1

iTrader: (1)

and it starts in half a crank now too

TooLateVTEC

iTrader: (2)

Probably sounds different from having a different gear ratio.

Sounds nice.

31camaro

iTrader: (2)

quick question, so if you were able to use the msd starter, does that mean you can use any sbc starter on the lt1 as long as its for a 153 tooth flexplate?

31camaro

iTrader: (2)

my bad, i didnt pay attention enough to notice you put it on a ls1

aerojt

iTrader: (4)

Reminds of of the sounds of a Veryron makes, very high pitched and different.

BTL FED

iTrader: (9)

I Have one too, but it doesn't fit with ARH 1 7/8 headers , so if anyone needs a brand new MSD starter with a few scratches just pm me.

sjsingle1

iTrader: (1)

the sound kinda reminds me of a F16 starting up......does not fit the ARH??? its not that much thicker than the stock starter .....but much shorter .......fits my TSP 1 7/8 just fine

cals400ex

iTrader: (27)

heck the stock one doesn't fit well with the AR 1 7/8 headers.

BTL FED

iTrader: (9)

I guess its the way the ARH headers hug the block right there, believe me I tried for a couple hours clocking it every which way, but no deal, like the guy above me said its a tight fit even with the stock starter.