Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Please help!!!

Thread Tools
 
Search this Thread
 
Old 12-31-2011, 09:08 PM
  #1  
Teching In
Thread Starter
iTrader: (19)
 
bluecamaross's Avatar
 
Join Date: Dec 2010
Location: Newnan, GA
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts

Default Please help!!!

Sorry, Not sure if this is the correct place for this question.
My car (a 2000 M6 camaro) idles high when you are driving (hot or cold) when you push in the clutch or take it out of gear still rolling until the car slows down.
The car has to be going about 20mph before the idle slows down to about 900rpm. When it's rolling faster than 20mph it stays idled up at about 2000rpm.
Not sure what the deal is! It revs up and comes right back to idle just fine sitting still....
Anybody please help!!!
Old 12-31-2011, 09:29 PM
  #2  
TECH Fanatic
 
justin hover's Avatar
 
Join Date: Jan 2011
Location: Michigan
Posts: 1,358
Likes: 0
Received 0 Likes on 0 Posts
Default

You should inspect your throttle body..See if aythings holding it up
Old 12-31-2011, 09:34 PM
  #3  
Teching In
Thread Starter
iTrader: (19)
 
bluecamaross's Avatar
 
Join Date: Dec 2010
Location: Newnan, GA
Posts: 26
Likes: 0
Received 0 Likes on 0 Posts

Default

Originally Posted by justin hover
You should inspect your throttle body..See if aythings holding it up
The throttle body closes all the way. Its free and smooth. I can run the car sitting still and it idles down as soon as i let off the throttle. The only time it idles high is when the car is rolling over about 20mph.
Old 12-31-2011, 10:15 PM
  #4  
Staging Lane
 
cobrakillincamaro's Avatar
 
Join Date: Jun 2008
Location: Ft. Rucker AL
Posts: 65
Likes: 0
Received 0 Likes on 0 Posts
Default

My car does the samething but intermittently. I think it might have to do with the IAC. Some other people have sugested a vacume leak before.
Old 01-01-2012, 05:27 AM
  #5  
TECH Addict
iTrader: (2)
 
omarrakeen's Avatar
 
Join Date: May 2009
Location: UAE, Dubai.
Posts: 2,475
Likes: 0
Received 1 Like on 1 Post
Default

more info? when did this start? did you install anything lately? new mods or repairs? it could be a vacuum leak, iac, maf or map..any codes yet?
Old 01-01-2012, 08:38 AM
  #6  
TECH Senior Member
 
garygnu's Avatar
 
Join Date: Feb 2009
Posts: 5,446
Received 4 Likes on 4 Posts

Default

clean out the IAC,but also check your TPS .




All times are GMT -5. The time now is 10:08 AM.