Krab

iTrader: (28)

Here are a few pics of my AMW catch can installed with Al's (Dark Age) bracket. Both are top quality pieces, and look pretty cool to boot.

Krab

iTrader: (28)

Someone in another thread was also asking for pics of how to run the hoses, so I made sure to get a nice close up of that in the pics. I didn't really get a nice shot of the bracket since it's such a tight space, but it's there.

mcflyz28

lose the teflon tape, they are NPT and not needed, I have the same set-up with the bracket, teaspoon of oil after 1000 miles.

Krab

iTrader: (28)

Thanks for the tip! I checked mine earlier today, and it had a bit of oil in it after about 500 miles or so. Do you just unclamp the catch can and drain the oil back in the oil fill cap?

K I L O

iTrader: (5)

Off Topic but got any pics of your car? im from the valley and also have a Black SS

SNAXS

Hey Bad Black SS where are you from? Im from the Valley too. LOL J/K man. Thanks for the free food hehe.

Krab yeah that really is a nice Catch Can I have the red one on my SS.

K I L O

iTrader: (5)

LOL....its all good man...is this the thing you showed me about clean everything before going in them motor?..oh sorry for high jacking your thread

Z28Venom

iTrader: (13)

Nice pics...

My Dark Age bracket should be arriving any day now.. Very clean setup..

ddelallata

iTrader: (2)

looks really good KRAB. I'm from Brownsville!

K I L O

iTrader: (5)

RGV IN THA HOUSE!

Krab

iTrader: (28)

Yikes, a few valley guys on the board huh? I have a couple of pics of my car, let me try to post them up.

Thanks for the compliments guys. I hope this helps those who needed help on the hose routing.

ddelallata

iTrader: (2)

What size hose is that on the PCV system/catch can? I heard an air leak tonight and upon inspection I noticed that the PCV to Intake hose had a tear. I sealed it up with some electric tape, but would rather put a new piece of hose on it. Let me know if the markings on the hose supplied with the catch can have any markings on it that indicate the size. thanx.

Krab

iTrader: (28)

Since it's the piece after the pcv valve going into the intake, just buy some 3/8" automotive hose and it will get the job done. If it's before the valve, I think you have to buy the entire thing running from the valve cover, since it's one whole piece and a type of hard plastic.

K I L O

iTrader: (5)

Cool ived only seen like 2 Black SS close to my area....one was black looked stock and has blue lights...there another one that has Flames in front...but still post the pics

john shea

dumb question. What is a catch can?
john

99huggerorangeZ

iTrader: (2)

how much does dark age sell the brackets for and does anyone have a pic of the bracket itself??

SNAXS

Not a dumb question at all, A catch can is a way of stopping oil getting into the LS1/LS6 intake, doesnt prevent oil consumptions.

Im from Rio Grande City Texas BTW.

z28man

nice, ive got the black one as well but mounted on the other side. these guys amw have got there **** together on this catch can item. it is an awesome well made piece!!!! highly recommend!

Krab

iTrader: (28)

Just posted some pics of my car in the Texas forum.

SNAXS, I wouldn't want to run into either one of your cars.

K I L O

iTrader: (5)

LOL no one from the Rgv will probably step up to the monster