Standard cast headers / cat positioning
#1
Launching!
Thread Starter
Join Date: Feb 2006
Location: UK
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Standard cast headers / cat positioning
What`s the max hp the standard LS1 cast headers will take before I`ll to need to get tubular ones ?
And how far away from the headers can I fit my cats ?
At the mo. they`re gonna be about 4ft from the collector flange.
And how far away from the headers can I fit my cats ?
At the mo. they`re gonna be about 4ft from the collector flange.
Last edited by Pete 1; 06-10-2006 at 11:16 AM.
Trending Topics
#9
Launching!
Thread Starter
Join Date: Feb 2006
Location: UK
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys, problem is, I`m doing this ............. https://ls1tech.com/forums/conversions-swaps/460867-ls1-into-vauxhall-astra-coupe.html
and dont have much room.
Which mid lengths would you go for, Macs or what about these ?
http://www.gravanatuning.com/applica...IGNITION_WIRES
and dont have much room.
Which mid lengths would you go for, Macs or what about these ?
http://www.gravanatuning.com/applica...IGNITION_WIRES
#11
Launching!
Thread Starter
Join Date: Feb 2006
Location: UK
Posts: 276
Likes: 0
Received 0 Likes
on
0 Posts
Dont wanna turbo it yet, need to get everything in and sorted first.
What about the positioning of the cats, they`re about 4ft back from the collectors, will this be ok ???
What about the positioning of the cats, they`re about 4ft back from the collectors, will this be ok ???