What plugs to use in my new motor?
#1
10 Second Club
Thread Starter
iTrader: (4)
Join Date: Feb 2005
Location: Lagrangeville, NY
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
What plugs to use in my new motor?
hey guys i am just about done builing my 455 ci ls1. i had the tr55's in my motor before i did the work to it, but i wasnt sure if the tr55's could be used with this motor as well. thanks for the help
Jon
Jon
#5
10 Second Club
Thread Starter
iTrader: (4)
Join Date: Feb 2005
Location: Lagrangeville, NY
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the help, yeah the car will have fairly high compression, but it will be low enough to still run on 93 octane. i cant remember exactly what the compression is off hand now. but so the tr 6 would be my best bet? thanks guys
Jon
Jon
Trending Topics
#9
That's what she said...
iTrader: (8)
Originally Posted by staringback05
im not sure about the 7.0....but the first set i used was the ac delco iridiums in my 5.7...ran fine
Originally Posted by J02ws6transam
anybody else recomend the tr6's?
Look up some people running large displacement and PM them. Katech/MTI or anyone else who builds big CI motors should be able to give you some help if you give them a ring. Who built the 455?
#10
10 Second Club
Thread Starter
iTrader: (4)
Join Date: Feb 2005
Location: Lagrangeville, NY
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Steve at race engines did the block work and did a great job. My dad and i are the ones assembling the engine. maybe ill just put the ac delcos in there for now, cause after we dyno tune it, we will pull a few out anyway and take a look at them, so we will see what they look like at that time and could always change them. thanks for the help
Jon
Jon