Exhaust Manifold Bolts...What Size????
#1
On The Tree
Thread Starter
Join Date: Dec 2001
Location: Sacramento/Marysville, Ca
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Exhaust Manifold Bolts...What Size????
I asked a couple people if LS1 exhaust manifold bolts were standard sbc 3/8 and the answer I got was yes....So I ordered ARP header bolts for sbc and received them today and they dont fit. The stockers look like fine thread and they are metric. Anyone know what size they are and are they fine or course thread? TIA
-Dave
2000 Z28 M6
-Dave
2000 Z28 M6
#5
On The Tree
Thread Starter
Join Date: Dec 2001
Location: Sacramento/Marysville, Ca
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Re: Exhaust Manifold Bolts...What Size????
I figured out what size they are....8mmx1.25 and they are 1 3/16 long...ARP doesnt make any bolts this size but they do offer studs...Now I just have to decide if I want to run studs, stock bolts, or those POS stage 8 bolts...flip a coin I guess...
-Dave
-Dave
#6
TECH Fanatic
Re: Exhaust Manifold Bolts...What Size????
Dave...
Whats the problem with Stage 8 locking bolts? I was considering those, but, if there are problems, please let us know.
Ron,
Whats the problem with Stage 8 locking bolts? I was considering those, but, if there are problems, please let us know.
Ron,
Trending Topics
#8
Re: Exhaust Manifold Bolts...What Size????
I just ordered some stock replacements. Just anti-sieze them and everything should be fine. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Eric
Eric
#9
TECH Fanatic
Re: Exhaust Manifold Bolts...What Size????
Eric...
Me again.... <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Any P/Ns and how many total.
Ron, (Korea)
Me again.... <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Any P/Ns and how many total.
Ron, (Korea)
#10
Re: Exhaust Manifold Bolts...What Size????
Ron, I sent you an email. Get back in touch with me so I know you got it. I got a whole big list of suggestions for ya. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
ERic
ERic
#11
LSx exhaust manifold bolts
For LSx motors, they are M8 1.25 x 30mm....at least that's the size I need for my 08 Suburban 5.3. Ihad to get mine at True Value because Home Depot didn't have much of a selection of metric stuff and what they did have was more expensive than it should have been. Also, just an FYI the metric equivalent to what folks call grade 8 bolts in standard is metric 10.9. They are the best quality as far as I can tell. I got them to use on the engine cradle I bought from Jegs to hold my LSx motor. Overkill I know, but the Chinese bolts that came with the cradle had me a little concerned. If I ever put an engine and tranny on that cradle I'll replace all the hardware that came with it as a cheap insurance policy.
Last edited by Kendall Gifford; 03-05-2020 at 08:13 PM. Reason: additional information
The following users liked this post:
V8 Supra Builder (11-03-2020)
#12
TECH Senior Member
For LSx motors, they are M8 1.25 x 30mm....at least that's the size I need for my 08 Suburban 5.3. Ihad to get mine at True Value because Home Depot didn't have much of a selection of metric stuff and what they did have was more expensive than it should have been. Also, just an FYI the metric equivalent to what folks call grade 8 bolts in standard is metric 10.9. They are the best quality as far as I can tell. I got them to use on the engine cradle I bought from Jegs to hold my LSx motor. Overkill I know, but the Chinese bolts that came with the cradle had me a little concerned. If I ever put an engine and tranny on that cradle I'll replace all the hardware that came with it as a cheap insurance policy.
The following users liked this post:
V8 Supra Builder (11-03-2020)
#14
TECH Senior Member
#18
TECH Senior Member
The following 2 users liked this post by V8 Supra Builder:
G Atsma (09-07-2020), Purcell169 (05-04-2024)