air removal
#1
On The Tree
Thread Starter
iTrader: (6)
Join Date: May 2006
Location: Texas
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
air removal
ok long story short got through most of the procedure in removing the air system on my 2000 trans am. Now im stuck. I cant remove the little black saucer that the vaccum plugs into. Done the search option and know about the bolt behind the motor. question is how do you get to that bolt. Is there any other option on removing the part? ANY help is appreciated.
#2
11 Second Club
iTrader: (27)
Join Date: May 2005
Location: Your girl's back door giving her the long stroke while you're at work
Posts: 6,801
Likes: 0
Received 3 Likes
on
3 Posts
If I remember correctly the bolts are screwed into a rubber isolator. You should be able to get two of them out and yank the motor off the bracket
#5
on mine i looked for a bolt by feel but couldnt find one so i really yanked hard and something popped off. after looking at the unit it appears that it was held on by some kind of plastic clip instead of a bolt. i have an 02 ss so maybe yours is different?
#6
TECH Fanatic
iTrader: (6)
Join Date: May 2004
Location: Katy, Texas
Posts: 1,381
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ripper415
on mine i looked for a bolt by feel but couldnt find one so i really yanked hard and something popped off. after looking at the unit it appears that it was held on by some kind of plastic clip instead of a bolt. i have an 02 ss so maybe yours is different?
#7
On The Tree
Thread Starter
iTrader: (6)
Join Date: May 2006
Location: Texas
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
got another day off, round two of the air delete. i found an egr blockoff plate down @ the bottom of my toolbox yesterday. most likely gonna clip the egr as well. this should go alot smoother, thanks for the replies guys.
o one more question, any thoughts on adding a small catch can? stang killa on this forum whipped up a nice piece i saw on this site. interesting...
o one more question, any thoughts on adding a small catch can? stang killa on this forum whipped up a nice piece i saw on this site. interesting...