Intake question..
#1
Intake question..
I am going to install an MS3 cam in my car before next summer. I want a better intake than the LS6 i originally planned on getting cause with that big of a cam i was thinking it may be the limiting factor. So i was wanting to know what the next step up for an intake would be from an LS6 intake. And another question, if I did get an LS6 intake, would it be whats holding me back the most on the setup in my sig? I know the LS1 heads a pretty good and aftermarket ones cost too much for me to care about getting them so I won't be getting those...
#3
On The Tree
iTrader: (1)
Join Date: Jan 2007
Location: ALABAMA
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
I really know nothing about cam's but, I have 430 rwhp though a LS6 intake and ported tb. Also a friend of mine with cam only has 400 rwhp through a ls6
intake and ported tb. His name on here is Pontiac search for his sn name and look at all the crap he has done and I think it also tells you how big of a cam he has. Hope this helps ya man.
Jimmy
intake and ported tb. His name on here is Pontiac search for his sn name and look at all the crap he has done and I think it also tells you how big of a cam he has. Hope this helps ya man.
Jimmy
Trending Topics
#8
I really know nothing about cam's but, I have 430 rwhp though a LS6 intake and ported tb. Also a friend of mine with cam only has 400 rwhp through a ls6
intake and ported tb. His name on here is Pontiac search for his sn name and look at all the crap he has done and I think it also tells you how big of a cam he has. Hope this helps ya man.
Jimmy
intake and ported tb. His name on here is Pontiac search for his sn name and look at all the crap he has done and I think it also tells you how big of a cam he has. Hope this helps ya man.
Jimmy
#10
On The Tree
iTrader: (1)
Join Date: Jan 2007
Location: ALABAMA
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
It is Pontiac.... https://ls1tech.com/forums/member.php?u=16679
There is his profile and all his stuff.
Jimmy
There is his profile and all his stuff.
Jimmy
#11
TECH Regular
iTrader: (1)
Join Date: Oct 2003
Location: Bloomington, MN
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
Oh and BTW, the 90mm Fast is being replaced by a 92mm it looks like.