wtfx100

iTrader: (1)

Are all patriot ls1 heads cast and cnc ported? I bought a car supposedly with patriot stage 2 heads but the heads dont look like they are cast... will get some more pics on monday...

Full-Force

iTrader: (11)

Do you know what cast is? All production heads will be cast. Only a handfull of billet heads out there that I know of. Now cnc means they have been machined in certain areas. You would have to have the heads off the car to see these areas. It will only be in the intake and exhaust runners, and maybe the combustion chamber.

I think most Patriot heads have their name ball milled into one or both of them on the end. It should be visible from under the hood.

davered00ss

iTrader: (4)

Should see the Patriot name milled into them it that's what they are.

davered00ss

iTrader: (4)

Not patriots, but you get the point of where they should be milled with the name.

00MaroonZ28

iTrader: (3)

If your looking at the engine, Patriot should be engraved on the head to the left.

wtfx100

iTrader: (1)

No engravings but this is a fairly old set.

Mr. Brett

iTrader: (13)

I'm pretty sure that Patriot has always put their name on the heads.....

1 nasty z

iTrader: (1)

heres what a patriot head would look like from the front sorry for the fuzzy pic.. it was taken on a camera phone

jomomma

iTrader: (39)

i ordered a set of 243`s from patriot and they have no engraving on them. i have the invoice of what they are and thats it.

Kingc8r

iTrader: (21)

I thought the always engrave their name.....guess not

WSsic66

iTrader: (2)

thread from the dead can anyone at patriot confirm this I also just purchased used Stage 3 heads 3019 stamped on head with other part number but no name brand milled into head. any help??

EDS01SS

iTrader: (30)

I have a very old set of their heads also and they dont have the name engraved. I did call them though and there is a number on the heads that they can verify the heads with

WSsic66

iTrader: (2)

Thank you !