rio95cobra

iTrader: (3)

at first , my car ran great! then, I cranked it up after work today and was driving out of my neighborhood, but when i stomped it, it just started spitting and sputtering! it ran good when i was driving it normally, but not at w.o.t.

so i took it by my friends house, he drove it, and it did fine. So i hooked a scanner up to it, and i was looking to see if there were any other codes thrown other than the lack of my egr. NOpe, there wasnt.

And now, it seems to be driving fine. What the hell is up with that? could it be that the computer just needed to relearn itself after installing the new intake?

jsteele90

iTrader: (13)

nope sounds like a vacumn leak or something. make sure all your bolts are tight and all the **** in the back is hooked back up.

rio95cobra

iTrader: (3)

they are and everything in the back is hooked up. correct me if im wrong, but my car would be idling shity if i had a vacuum leak

LS184

iTrader: (7)

if u had a vacumn leak u whould most likely b haveing high idle issues.....does it only do it at wot? or have u only gone wot once?

rio95cobra

iTrader: (3)

yeah it was doing it only at w.o.t.

but now it seems to be doing good cruising or when i stomp it

94'BLKBRD

iTrader: (76)

Check your map sensor conections and brake booster.

rio95cobra

iTrader: (3)

where is the map sensor?

LS184

iTrader: (7)

rio95cobra

iTrader: (3)

wow im not remembering even seeing that sensor on the front of the intake.

so if your facing the engine with your hood open, its right in front of you on the left, right on the intake behind the t.b.?

LS184

iTrader: (7)

back of ur intake

LS184

iTrader: (7)

lol no i meant the back of ur intake sorry for the confusion lol

rio95cobra

iTrader: (3)

oook lol i was gonna say i remember seeing that on the back side of the intake. And yes, i plugged that back in .

im just gonna see if it acts up any at all tomorrow. if it doesnt, im just gonna pretend nothing ever happened. if not, i will be back tomorrow

LS184

iTrader: (7)

ya let us know

94'BLKBRD

iTrader: (76)

Did you connect the small hose that's below the map sensor?

ramairracer

iTrader: (13)

maybe you broke the oil pressure swithch, or you reused some old gaskets causing it to run really lean

94'BLKBRD

iTrader: (76)

^^^^^ The oil pressure switch wont cause idle issues. How can old gaskets cause his car to run lean?