98WsSick

iTrader: (6)

I found a deal on craigslist not sure if it is good. The guy has ported and polished 241 castings with beehive valve springs, and a 230/226 cam 113+2 573 in. 570 ex. I don't know much about heads and cams but the guy is barely asking anything, I have stock 98 heads so these would be an improvement anyways. My car is a weekend driver/track every once in a while I was wondering if this is an okay setup. Mods are full boltons, intake, 100 shot, gears, 6 speed. Also what kind of numbers will this setup give me? Thanks guys

98WsSick

iTrader: (6)

nobody can tell me anything about the cam or heads? Cam is from comp cams btw..

98WsSick

iTrader: (6)

bump not even a one response

SOMbitch

iTrader: (8)

Well ported 241's are underated on here IMHO and can make good power.

A reverse split will work with a small N02 shot but is not optimal...... I would go traditional split.......