600 rwhp ideas
#7
LS1Tech Premium Sponsor
iTrader: (4)
We've built several 454 LSX motors that make well past 600rwhp. I believe with a aggressive 418 LS3 with PRC 237 heads you could get close to 600rwhp on a budget. I finished a few of those that made between 670-700 flywheel hosepower!!
The PRC LS7 heads on a 454 LSX engine we dyno tested made over 750flywheel hp on pump gas!
The PRC LS7 heads on a 454 LSX engine we dyno tested made over 750flywheel hp on pump gas!
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Trending Topics
#9
TECH Senior Member
iTrader: (5)
Heads, cam, intake manifold, headers, full exhaust. On a 346ci ls1 450rwhp(+-) To get into the 500-600 rwhp with a 346ci you'll need forced induction or some go gas, But for those power levels forged internals are very encouraged if you want the bottom end to live.