johnster

iTrader: (27)

hey guys,, well i fried the rings in my 346 so im going to built me a 383 over the next few months, well i got a ms4 cam is that a good cam 4 a 383, or should i sale it and go with something eles?

i did a searh and come up with nothing! john

Juicy J

iTrader: (5)

An MS4 would be fine for a 383. Good luck with the build.

SOMbitch

iTrader: (8)

I know a guy running high 10's all motor full weight on a 383/ms4 combo.....

Juicy J

iTrader: (5)

There are a lot of guys running MS3-4 cams in 383's. The cam is definately not too small for that motor, and the added cubes should make the most of the cam. In short what I am trying to say is I don't think it will max out the cam if thats what you are afraid of

BAD2000TA

iTrader: (6)

Does anybody have any dyno sheets for a 383 with an MS3? I'm considering an upgrade over my 224/230 cam.

Juicy J

iTrader: (5)

Here is one sheet https://ls1tech.com/forums/dynamomet...n-numbers.html

I know there are more, but I just don't feel like looking that hard. It looks like 500hp and 450tq+ on a very conservative set up, with a good looking curve.

An MS4 would make even more power. Not bad...

johnster

iTrader: (27)

thanks guys good info!!! keep it comeing

MJR7AD

iTrader: (36)

Good Cam forsure, But Custom Grind cam for the exact specs of your storker will always perform alot better to your motor. Balance everything from heads/chambers/pistons cc's/bore exc, then Cam is the Heart of it..

smok'nZ

iTrader: (160)

t rex is popular with 383's

johnster

iTrader: (27)

ya the trex is crazy! anybody got dyno sheets on a 383 with a trex??