My new cam (idle video)
09-30-2009, 10:32 AM
#1
On The Tree
Thread Starter
Join Date: Aug 2005
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
My new cam (idle video) Hey Guys,
Here is a short Idle video of my Torquer v2 on a 112lsa:
http://videos.streetfire.net/video/C...-m6_709732.htm
I spent last weekend tuning it with hp tuners and a wideband. Tuning it wasn’t bad at all. It drives great and pulls hard. Should have some track times next week. My best time before the cam, clutch, and 12 bolt was 12.64 @ 113.2mph w/ a 1.98 60’. I should be able to improve on that substantially
Here is a short Idle video of my Torquer v2 on a 112lsa:
http://videos.streetfire.net/video/C...-m6_709732.htm
I spent last weekend tuning it with hp tuners and a wideband. Tuning it wasn’t bad at all. It drives great and pulls hard. Should have some track times next week. My best time before the cam, clutch, and 12 bolt was 12.64 @ 113.2mph w/ a 1.98 60’. I should be able to improve on that substantially
09-30-2009, 01:54 PM
#3
On The Tree
Thread Starter
Join Date: Aug 2005
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Thanks , At first it did, but after I adjusted the idle set screw to bring IAC counts down between 40 and 60 it stopped. It also had a little bucking at low speed with light throttle but I was able to tune almost all of it out. I'm sure the 4.10's are helping a lot, but I think the drivability is great.
, At first it did, but after I adjusted the idle set screw to bring IAC counts down between 40 and 60 it stopped. It also had a little bucking at low speed with light throttle but I was able to tune almost all of it out. I'm sure the 4.10's are helping a lot, but I think the drivability is great. 
