1nasty86

iTrader: (63)

well my friend has a 01 trans am and he has finally decided to pull the trigger on a h/c swap.... going with stock 243's milled .020, bt racing pushrods and stock rocker friendly spring kit ( highly recommend them to anyone), ls7 lifters, ls2 chain and a 231/238 .617/.585 112+3 camshaft.... pics of the car and some parts.. 243 pic is of of a different set i sold but they looked almost identically clean..

Camaroking1996

Looks like a good setup! Very different cam choice.

1nasty86

iTrader: (63)

Just a lsl/xe cam... Nothing special

MonmouthCtyLS7

iTrader: (6)

Seems like a lot of trouble to be bolting on a set of stock 243's...have him send them out for porting first.

1nasty86

iTrader: (63)

he is not going for an all out build.. all he wants is 400 rwhp... any more is just ****

garygnu

what springs is he using ?do you mean stock GM springs ?

1nasty86

iTrader: (63)

noo... they are the 219$ brian tooley spring kit.. fixed my typing

arock24

iTrader: (4)

I'm doing a similar project with a torquer v3 cam...is he planning on using 7.400 rods and the stock spec head gaskets?

Camaroking1996

Does he already have full bolt ons? Auto or M6?

sabersaw30

iTrader: (10)

Any dyno no on settup know? Just curious how much he is going to pic up.

1nasty86

iTrader: (63)

No before results... Car still has the srock tune going to the h/c swap... And yes doing 7.400 pushrods and stock gaskets.. Car already has ls6 intake, coated 1 3/4 longtubes, y pipe and borla catback.. 6 speed car so it should hopefully make around 400-410 and more with a fast intake later down the road

1nasty86

iTrader: (63)

ended up getting the lsl/lxl camshaft..... 231/238 .617/.615 112+3....... should be at his house next week