Heads question
#1
TECH Regular
Thread Starter
iTrader: (1)
Join Date: Aug 2003
Location: Norman OK
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
Heads question
if got an f13 cam on a 112+4 and i dont know anything about milling or p to v clearance and just wondering what heads would fit and make good power with that cam. i am interested in the AFR's but like i said i dont know if i will need to get them milled or anything else
thanks in advance
thanks in advance
#2
TECH Senior Member
Contact Allen at Futral and ask for his recomendations. Before milling I would consider gasket thickness first for a tighter quench and then mill accordingly for desired SCR.
Assuming you still can due to PTV without flycutting.
Assuming you still can due to PTV without flycutting.