Tony Mamo where are the 225 small chambers at?
#4
Restricted User
Thread Starter
iTrader: (9)
Join Date: Sep 2002
Location: Sierra Vista, AZ
Posts: 7,603
Likes: 0
Received 0 Likes
on
0 Posts
Yep seen that thread earlier. Looking for something a little sooner than it looks like ET or AFR will be ready for. Do like the flow on the ET AFR 240's right in range with my build up.
#5
Originally Posted by CAT3
Gosh man, its been forever and not done yet? Tell production to get on the ball, or off the pipe!
Unfortunately nothing new to report but I'm hoping within the next two months. Sorry guys....we are just as disappointed as all of you are but keep in mind that when you finally receive a set of AFR's, all of the R&D is actually done.
#6
TECH Addict
iTrader: (16)
Join Date: Jul 2004
Location: Nevada, TX
Posts: 2,218
Likes: 0
Received 0 Likes
on
0 Posts
Something I am curious about and never heard it addressed. The 205 and 225 both start out as the same casting. Well you have a small chamber program for the 205 and the larger runner program for the 225, you couldnt crank that combo out? Obviously the smaller chamber is for a smaller valve size, BUT the right seat cutter will deshrough the chamber for the larger valve and the rest can be hand blended. Is that too far off base?
Brandon
Brandon
#7
Originally Posted by xfactor_pitbulls
Something I am curious about and never heard it addressed. The 205 and 225 both start out as the same casting. Well you have a small chamber program for the 205 and the larger runner program for the 225, you couldnt crank that combo out? Obviously the smaller chamber is for a smaller valve size, BUT the right seat cutter will deshrough the chamber for the larger valve and the rest can be hand blended. Is that too far off base?
Brandon
Brandon
Hopefully soon guys....
Tony M.
Trending Topics
#8
10 Second Club
iTrader: (1)
Originally Posted by Tony Mamo @ AFR
A premium product won't produce premium results if we take shortcuts in it's execution. While it is painfully obvious we are losing sales by not having them complete already, more sales would be lost in the long run if we compromised the quality of the product in question just so we could release it early....
Hopefully soon guys....
Tony M.
Hopefully soon guys....
Tony M.