what do i need ot flycut?
#1
what do i need ot flycut?
Gonna buy Patrick G s 205 AFRs and am gonna need to flycut i think since they are milled .030 with my 233-239 .589-.603 TSP cam. What is all needed to flycut while the still in the car. Is there and good guide lines for doing it. I think thunder racing has stuff, i need to get a 90* adapter for the back i think. If someone has done it and i know you have please let me know all the tools you used. Thanks
#4
Staging Lane
iTrader: (1)
Join Date: Apr 2004
Location: Sierra Vista, AZ
Posts: 64
Likes: 0
Received 0 Likes
on
0 Posts
I think you can rent the tool from LG, And they'll tell you everything that you need to do. I've never seen or done it myself, So can't help you there. I beleive they put a dummy head on there and tighten it down nice and snug, and after checking the clearance w/ clay or something, you can tell what you'll have to cut. Good luck.
#5
Launching!
iTrader: (20)
Join Date: Jul 2002
Location: NJ
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jophis37
I think you can rent the tool from LG, And they'll tell you everything that you need to do. I've never seen or done it myself, So can't help you there. I beleive they put a dummy head on there and tighten it down nice and snug, and after checking the clearance w/ clay or something, you can tell what you'll have to cut. Good luck.
Trending Topics
#10
Yup. I got mine from TEA. Their cutter was rented out, so I just used a dummy head from them and bought the cutters myself. You will need a right angle drill for the four back pistons....or at least I did! I have the 2.125 cutter and 11/32" shaft available for rent!
so they just rented you there head and would have done the same for the tools but it was gone. that would be kick ***.... i need to call them for sure
so they just rented you there head and would have done the same for the tools but it was gone. that would be kick ***.... i need to call them for sure