what gear for f13 cam?
09-27-2006, 10:45 PM
#1
what gear for f13 cam? I have an a4 car with 3800 converter f13 and longtubes..now I have 342 gears should I go 373's or 410's? Its a DD but I do 1/8 mile racing with it and dont give a damn about highway racing thats not for me..I also spray the car..
thanks in advance, Jason
thanks in advance, Jason
its a good in between gear. 4.10's if you want more acceleration and dont care about mpgs Trending Topics
09-29-2006, 12:14 PM
#16
11 Second Club
Join Date: Jun 2005
Location: Was New Orleans, but swam to Baton Rouge
Posts: 1,537
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 67SS&99Z28
You can't get a 3.90 for a stock 10 bolt, can you? Only a 9" or a corvette rear, right?
09-29-2006, 12:38 PM
#17
Originally Posted by prostock_bigblock
step to 3.73s , 4.10 are alot of gear for an auto specially that 4160e has very close ratios.
If you are all 1/8 mile, don't care about mpg in your daily driver, then I agree with 4.10's for a stock 10 bolt. What are you trapping in the 1/8th now? You'll want to max out your rpm's in 3rd if possible.
09-30-2006, 06:46 PM
#18
Originally Posted by hammertime
I wouldn't say that 3.06/1.62/1.00 is a close ratio. But then again, it doesn't much matter with a 3800 stall.
If you are all 1/8 mile, don't care about mpg in your daily driver, then I agree with 4.10's for a stock 10 bolt. What are you trapping in the 1/8th now? You'll want to max out your rpm's in 3rd if possible.
If you are all 1/8 mile, don't care about mpg in your daily driver, then I agree with 4.10's for a stock 10 bolt. What are you trapping in the 1/8th now? You'll want to max out your rpm's in 3rd if possible.
It's barely out of 2nd gear.
