best longtubes for the buck.......
#5
TECH Resident
iTrader: (24)
Join Date: Jan 2007
Location: Rhode Island
Posts: 838
Likes: 0
Received 0 Likes
on
0 Posts
Id say the 1 7/8" Texas Speed Headers for 500 bucks I don't think you can go wrong the size of the header won't hurt anything on a 346ci but if you would decide to go bigger in motor size in the future u won't have to buy headers again.
#6
Teching In
Join Date: Jan 2010
Location: Sebastian,FL
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
i believe one of the sponsors on here is still having a sale on their hooker headers, look around in the sponsor section
edit: heres the hooker sale https://ls1tech.com/forums/sponsor-s...-blow-out.html
could also look up the ebay ones, 200 bucks shipped for stainless headers
edit: heres the hooker sale https://ls1tech.com/forums/sponsor-s...-blow-out.html
could also look up the ebay ones, 200 bucks shipped for stainless headers
#7
LS1Tech Premium Sponsor
iTrader: (4)
I've heard lots of complaints from the ebay stuff not fitting that well. Checkout the TSP 1 7/8" headers if your needing big tube headers, or the Pacesetter headers & TSP y pipe if your looking for a 1 3/4" setup
www.texas-speed.com
www.texas-speed.com
__________________
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Jason
Co-Owner, Texas Speed & Performance, Ltd.
2005 Twin Turbo C6
404cid Stroker, 67mm Twins
994rwhp/902lb ft @ 22 psi (mustang dyno) www.Texas-Speed.com
Trending Topics
#10
TECH Fanatic
iTrader: (9)
Join Date: Mar 2004
Location: Pasadena Texas
Posts: 1,318
Likes: 0
Received 0 Likes
on
0 Posts
I just ordered the Edelbrock 13/4x 17/8 Victor comp headers for 400.00 shipped. These are the Tritech coated with the welded collector. I ordered them from the Edelbrock on line store. This is a great deal!!. These headers have made good power on peoples builds.
#11
On The Tree
Join Date: Mar 2005
Location: South Jersey
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
from what everybody says id go pacesetter, i have flowtechs and where the collector bolts up with the ory is screwed up never been able to get them to seal right not the only set of them ive had problems with and on different applications also, definitly not going to be replacing anything with them in the future