what weight engine oil!
#1
Teching In
Thread Starter
Join Date: Feb 2005
Location: missouri
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
what weight engine oil!
Currently I am useing 0/40wt mobil 1 synthetic, is any one useing a 20/50 weight by chance and would this be better to use!!!
opinions apreciated...
opinions apreciated...
#6
TECH Resident
20W50 seems to result in noisy tappets. Engine a lot quieter with the 10W30 or less M1 as recommended by the factory.
As BigRich noted, unless you are getting real hot on a race circuit or something then the 20W50 would be a similar viscosity at the constant higher temps.
As BigRich noted, unless you are getting real hot on a race circuit or something then the 20W50 would be a similar viscosity at the constant higher temps.
#7
10 Second Club
iTrader: (25)
On my build I am using a mix of 5-30 and 20-50. The reason is the Valvoline racing oil has alot of zinc in it but I cannot find it in the 10-40. So I mix the 2 so I can have the zinc but thin the oil out a little at the same time. I would not use straight 20-50 unless you have issues you are tyring to resolve like low oil pressure or ecessive bearing clearances.
Trending Topics
#8
TECH Enthusiast
iTrader: (12)
Oil Weight
The LS7 gets 0w-40 Mobile 1 diesel oil, although it can be hard to find sometimes. For the zinc component, Redline (or Comp) break-in additive is used.
The 6.0 (GTO-spec w/hotter cam and 10.9 cr) in my truck gets 5w-30 Mobil 1 with the same zinc additives.
The 6.0 (GTO-spec w/hotter cam and 10.9 cr) in my truck gets 5w-30 Mobil 1 with the same zinc additives.
#10
READ THIS AND STOP POSTING THESE OIL THREADS THERE ARE A MILLION http://www.ferrarichat.com/forum/faq...=haas_articles
#11
Launching!
Join Date: Aug 2007
Location: El Paso, TX again
Posts: 218
Likes: 0
Received 0 Likes
on
0 Posts
It's not a big deal if there is another oil thread. I understand that there a MILLION of them but it's not hurting anyone.
GC here, I hear a lot of good things about the 0w-40 stuff from Mobil.
WOW...someone is using the "new" Castrol Edge...wonder how that stuff is. Think with your Dipstick!!!!
GC here, I hear a lot of good things about the 0w-40 stuff from Mobil.
WOW...someone is using the "new" Castrol Edge...wonder how that stuff is. Think with your Dipstick!!!!
#13
Now in all seriousness, if the engineers at GM designed the tolerances for Mobil 1 5w30 why is this a question? Really, i'm not trying to be a smart ***, just want to know since i'm changing my oil asap. Also what oil filter?