Valley cover
#3
Launching!
iTrader: (1)
Join Date: Sep 2007
Location: Norway
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
u sure about that? i run a 04 vette 5.7 block with a LS2 vented valley pan. i only had to lower the length of the bolts for the plastic vent, and remove the alublock inside the valley. it was a hour of modifications.. it works great for my supercharger setup.
#6
you will have two holes open on the LS1 valley cover for the knock sensors. the LS2 doesnt have those holes and you will have open oil passages from the lifters. the LS2 cover has seals for those holes which are made for DOD on other RPOs not used on the LS2 but they are there in the block
#7
I knew about the Knock sensor. I was going to TIG weld aluminum over them shut.
I didn't know about the oil passages, but I have heard you can have them tapped and plugged? The other issue is someone meantioned the oil pressure sensor. I haven't looked in to that yet!
Ed
I didn't know about the oil passages, but I have heard you can have them tapped and plugged? The other issue is someone meantioned the oil pressure sensor. I haven't looked in to that yet!
Ed
Trending Topics
#8
I knew about the Knock sensor. I was going to TIG weld aluminum over them shut.
I didn't know about the oil passages, but I have heard you can have them tapped and plugged? The other issue is someone meantioned the oil pressure sensor. I haven't looked in to that yet!
Ed
I didn't know about the oil passages, but I have heard you can have them tapped and plugged? The other issue is someone meantioned the oil pressure sensor. I haven't looked in to that yet!
Ed
#9
TECH Junkie
iTrader: (18)
There are pictures of all of the different covers about 3/4 of the way down the page in this link.
http://www.enginepartsplus.com/pdf/P...%20Catalog.pdf
http://www.enginepartsplus.com/pdf/P...%20Catalog.pdf
#11
i got on on here for $40 shipped so just look around, theyre going on ebay from $40-50 as well... LS2 and LS3 are the same cover