forcd ind

iTrader: (7)

i installed LS3 heads/intake on my LQ4, now i realize the valve covers (at least the pass. side) because the baffles hit the offset rockers
is there one that fits and still use my LQ4 coil brackets-i could prob break out the baffles since i will prob cap off the nipple
curious what otheres did

litle88

iTrader: (20)

I bought a used set of Ls3 valve covers, found some on the classifieds for 100 bux? Iirc

Others have popped the rivets in there but I didn't want to hack my ****, it's just not in me lol. Just my .2

low2001gmc

iTrader: (148)

just break off the baffles. why pay for some others when the underneath of valve covers is not visible. use that money for some else....just my 98 cents lol

bww3588

iTrader: (49)

The baffles are for oil control. Unless your using the ls6 style pcv system, you will pull oil into the intake. Even if your using a catch can, you will be emptying it constantly and putting oil in it.

DirtyDirk

I bought new ls9 valve covers come with coils and I paid around $100 apiece. (needed coils also)

low2001gmc

iTrader: (148)

i also have some l92/ls3 black wrinkle valve covers with an6 fittings for sale if interested/needed....anybody can pm if they like....will come with the brackets pictured also....

Sales3@Texas-Speed

iTrader: (2)

On one of my setups, I cut the baffles out and swapped over to the LS6 style PCV system. It worked the same for me, and saved me a little cash.

WKMCD

iTrader: (2)

I used GM Bowtie VC's with a couple of changes.

Turtle Bite

iTrader: (3)

I used a set of LY6 valvecovers from the classifieds and the they ar made to clear the offsett rockers from the factory. My 2003 truck brackets bolted up just find. One hiccup was the LY6 and LS3 covers use a different type of oil filler neck and cap, so I had to order those peices seperately (about $30). I didnt want to cut the baffles of my LQ4 covers, just **** like that.

towerhand

I bought the pass side valve cover from Texas Speed, cost was 83 dollars and everything worked just fine