LS2 Lifters
#1
Teching In
Thread Starter
Join Date: Nov 2006
Location: North Carolina
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
LS2 Lifters
My LS2 is about to get a new cam and heads and some other parts. My new cam is right at .600 valve lift and the heads have double valve springs at somewhere around 140-160 pounds of seat pressure. I know that the factory LS2 rocker arms are nice and strong so Im going to re-use those, but what about the lifters? Can they handle the increased seat pressure?
Thanks for any help.
Thanks for any help.
#3
TECH Apprentice
iTrader: (9)
Join Date: Mar 2005
Location: Jamison, Pa
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Nasty N8
They should be just fine for that cam. I would rebuild the rockers though with our Harland Sharp mod $250
Nate
Nate
I sent a set in and was very happy with the finished product!!!!!
Bob K.