400rwhp possible w/this cam?
#1
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Goshen,In.
Posts: 1,027
Likes: 0
Received 0 Likes
on
0 Posts
400rwhp possible w/this cam?
never thought i would ask a question like this,but here goes..
is 400+rwhp possible with this cam?XE high lift int.XE exh.
224/.568int.
228/.539exh.
112+3 lsa
supporting mods would be UD pulley,LTs w/cats,ported TB..
car is an 06 GTO,M6
is 400+rwhp possible with this cam?XE high lift int.XE exh.
224/.568int.
228/.539exh.
112+3 lsa
supporting mods would be UD pulley,LTs w/cats,ported TB..
car is an 06 GTO,M6
Last edited by 66deuce; 02-03-2008 at 04:39 PM.
#5
TECH Fanatic
Thread Starter
iTrader: (1)
Join Date: Feb 2004
Location: Goshen,In.
Posts: 1,027
Likes: 0
Received 0 Likes
on
0 Posts
that's what i was thinking,i wanted a softer lobe to be easy on springs..car is a true DD in good weather,and i take trips sometimes with it..could step up to an XER lobe,or something similar..just tossing ideas around right now..
#7
On The Tree
iTrader: (5)
Join Date: Sep 2007
Location: Tampa, Florida
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
my stock 06 GTO M6 put down 360rwhp/360rwtq.......when i put kooks 1-7/8 long tubes that number went to 386rwhp/376rwtq......im SURE you will make 400rwhp with that cam AND supporting mods and tuning.
Trending Topics
#8
Launching!
iTrader: (3)
Join Date: Jan 2007
Location: Houston, TX
Posts: 200
Likes: 0
Received 0 Likes
on
0 Posts
Many times we have made over 400rwhp in 6 speed LS1 cars using our stealth II (224/220 116LSA) stock 243 castings, LS6 intake and cats....
With that cam it should be pretty easily done
With that cam it should be pretty easily done