Can someone ID these two plugs on my harness please?
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Location: Crystal Lake, IL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Can someone ID these two plugs on my harness please?
They branch off the loom that goes to the crank sensor and starter. This is an '04 6.0 LQ4 van harness. I just want to make sure they arent needed before I snip them.
Larger image: http://www.flickr.com/photos/388bu/2932463810/sizes/l/
Thanks.
Last edited by 388bu; 10-11-2008 at 03:42 PM.
#6
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Location: Crystal Lake, IL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man.
When it runs all depends on BRP getting my headers to me. Supposedly they have been shipped, but they cant find my tracking # and they would have been here by now.
My guess is a couple of weeks or more, but most of the work is done.
When it runs all depends on BRP getting my headers to me. Supposedly they have been shipped, but they cant find my tracking # and they would have been here by now.
My guess is a couple of weeks or more, but most of the work is done.
Trending Topics
#8
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Sep 2008
Location: Crystal Lake, IL
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
I have pretty good clearance with how the motor sits in there now. I did kind of a hack notch job on the A/C box, but I MIGHT have been able to get away without doing that, but it would have been real close!
I originally had the motor back about 3/4" from where it is now, but for various reasons decided to move it forward to where it is now.