mightyquickz28

iTrader: (8)

I'm getting a pair of Canfield heads but my current rocker arms are the Non-Self aligning CompCam 7/16" 1.6 Promags. I know these are considered an 'extinct' type of heads but does anyone have or remember what guideplates these heads would use? Since it has large valves, I'm sure the rockers are offset from the stock LT1 settings and thus cannot use my current GM guideplates.
Thanks!

ZONES89RS

iTrader: (25)

Well, my Dart 230 cc heads used regular guide plates, but there are adjustable pieces also, if i find the PN i will let you know.

mightyquickz28

iTrader: (8)

It's appreciated. These Canfields sport 2.05/1.60 valve sizes so I'm almost sure the intake valve is offset a bit from the stock location.

ZONES89RS

iTrader: (25)

Mine were 2.08 1.60 if it helps.

fergymoto

iTrader: (129)

Isky adjustable guideplates will work.

mightyquickz28

iTrader: (8)

Just got off the phone with John at Canfield Heads. Super nice guy. I ordered the guideplates from him. He told me some pertinent things to look out for on the head gaskets too.

RealQuick

iTrader: (14)

Nice Dave!

ZONES89RS

iTrader: (25)

Excellent, hope it goes together without anything holding you back.

BizZzatch350

iTrader: (33)

Good thinking going straight to the source, my answer would have been more boost.