sz28aro

iTrader: (9)

what needs to be done to a 1998+ camaro ss to run a 315 out back. what kind of wheel back spacing or off set of the wheels need to be

twitchtwice

iTrader: (12)

a 10.5" wide rear tire

Brian2006

iTrader: (42)

depends on the offset of the wheel and your suspension setup. I had to BFH and roll my fenders to fit a 305 on 56mm offset and prokit lowering springs:

integraxtc

iTrader: (11)

a 10.5" rim. Although I think a guy on here just did it on his stock ws6 rims but many say that isn't safe.

Check the wheel/tire section, faq as its been covered many times.

Like above, alot of times a Big F'n Hammer needs to massage the fender well where the tire rubs.

02BLKWS6MD

iTrader: (22)

I just did the BFH mod. I didnt have to roll the lip on the quarters either and I'm lowered on an eibach prokit and I have an 11 inch rim. Havent even come close to the lip on the quarter yet.

sz28aro

iTrader: (9)

thanks for the info..
i have a pair of 315/35-17s and a pair of 275/40-17 that i got for free and looking to put on

but were is the best place to look for some rims at?

02BLKWS6MD

iTrader: (22)

tomzwheels.com. they are a sponsor, look in the sponsor for sale section. They always have some good deals on wheels.

sz28aro

iTrader: (9)

everytime i click on anything it goes to this page and reads...

FATAL ERROR: register_globals is disabled in php.ini, please enable it!

02BLKWS6MD

iTrader: (22)

check the sponsor for sale section. heres one of the links:
https://ls1tech.com/forums/sponsor-s...omzwheels.html

you can PM them as well to find out what deals they have.

boydcoz71

iTrader: (19)

thanks for the info i just ordered set of 17 10.5 zo6's for the rear of my car all the info was great

02BLKWS6MD

iTrader: (22)

glad I could help.

sz28aro

iTrader: (9)

thanks now all i have to do is make up my mind on the ones i want...