WTB Forged Pistons and/or Rods
#1
WTB Forged Pistons and/or Rods
Just pulled my intake manifold off and found all kinds of oil within in intake manifold and pools of oil just sitting on top of my valves. Heads only have 10k miles on them and the block has 201k miles. Soooo Its time for an upgrade :reddevil Lemme know whatcha got, I'm looking for 4.030 lower compression forged pistons. Going to be boosted eventually.
Thanks guys!
Thanks guys!
Last edited by sschoeffler; 02-19-2009 at 06:54 AM.
#2
On The Tree
iTrader: (5)
Join Date: Jan 2006
Location: Boondocks MO
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
Just pulled my intake manifold off and found all kinds of oil within in intake manifold and pools of oil just sitting on top of my valves. Heads only have 10k miles on them and the block has 201k miles. Soooo Its time for an upgrade:reddevil Lemme know whatcha got, I'm looking for 4.030 lower compression forged pistons. Going to be boosted eventually.
Thanks guys!
Thanks guys!
#3
I have a set of manley rods 375+shipping i have forged pistons as well out of my 347 not sure if you would want them or not as well but a few of them are nicked up pretty good
500+ shipping you can have the rods arp rod bolts and the forged pistons
let me know
Mike 412-715-8169
500+ shipping you can have the rods arp rod bolts and the forged pistons
let me know
Mike 412-715-8169
Trending Topics
#9
9 Second Club
iTrader: (25)
Join Date: Dec 2004
Location: Alabama
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
I have 4 mahle powerpack 3.908 forged "flat top" pistons and 8 eagle 6.125 rods that were used about 3000 miles, you can still read the part number stamped on the pistons... you would need to order one piston, last time I checked it was 62$...
If I remember correctly I paid 600 for the pistons and about 350 for the rods
shoot me a reasonable offer (via PM) and they could be yours
If I remember correctly I paid 600 for the pistons and about 350 for the rods
shoot me a reasonable offer (via PM) and they could be yours
#10
Registered User
Join Date: Feb 2009
Location: HOUSTON TEXAS
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Chevy small block 5.7 LS1
I have a set of new JE forged alumnium pistons, coated with PolyDyn Ceramic coated top and PolyDyn Dry Film lube coated skirts. Details are as follows:
JE part number 221176
Bore 4.030, Stroke 4.000, rod length 6.125, comp Height 1.115, Piston Weight 395, Any Dish&InvDom, Inv Dome Vol, Top Ring 1.5mm, 2nd Ring 1.5mm, oil ring 3mm+space, includes rings, clips and pins.
I had to sell my car before my engine was finished. So now, I am selling the parts and this is all I have left. If interested, please reply to this message.
JE part number 221176
Bore 4.030, Stroke 4.000, rod length 6.125, comp Height 1.115, Piston Weight 395, Any Dish&InvDom, Inv Dome Vol, Top Ring 1.5mm, 2nd Ring 1.5mm, oil ring 3mm+space, includes rings, clips and pins.
I had to sell my car before my engine was finished. So now, I am selling the parts and this is all I have left. If interested, please reply to this message.