phoenix1987

iTrader: (3)

What the word on these? Any good? They are pretty cheap

http://www.revvalves.com/home.php?cat=202

9000th01ss

iTrader: (10)

They're pretty good valves, I've run them in big blocks, no problems.

I didn't like the idea at first because I found them new on ebay, but it just happened the guy with this ebay store lived right down the road from me so I went to pick them up.

They were in a big white box in plain plastic wrappers, he just dug the right amount out of the right box, and sold them dirt cheap.
They have the name and all etched into the side of the tip.

I later bought the same exact set straight from REV, packaged different, same etching on the stem, about 1/3 more on the price.

phoenix1987

iTrader: (3)

Cool. I know TSP uses them. I just thought for 7 bucks a piece I should check on them

vettenuts

iTrader: (4)

They are made by Eaton from what I have read, who also makes a lot of the valves for other name brand vendors and I believe OEM as well.

NemeSS

iTrader: (127)

they are pretty good valves, the 2.02 are pretty fair priced, and supposed to come with a backcut alredy

JuicedVette381

have them on my 2000 frc with no problems!

Beaflag VonRathburg

iTrader: (176)

I'm putting a set of their 2.08s in my new heads. Those 2.096s are really cheap. I may end up going with those instead.

Randy WS6

iTrader: (69)

I have them in my heads also, Good valves