1.7 rocker arms
#2
TECH Regular
Assuming that you have a stock valvetrain, I would rather spend some money on the springs than 1.7s. Stock LT1 springs are not the best pieces. Order some nice springs then some nsa 1.6s.
#5
I have upgraded springs already along with chromemoly pushrods and cc503 cam with 1.6s. Just thought about doing the 1.7s to get a little more out of the cam and wanted to know what all i need! Also has anyone ran them with the stock valve covers or aftermarket ones needed? My heads are setup for the 3/8 studs do i need to change to the 7/16 stud?
#7
TECH Senior Member
iTrader: (36)
I have upgraded springs already along with chromemoly pushrods and cc503 cam with 1.6s. Just thought about doing the 1.7s to get a little more out of the cam and wanted to know what all i need! Also has anyone ran them with the stock valve covers or aftermarket ones needed? My heads are setup for the 3/8 studs do i need to change to the 7/16 stud?