94Z28-MSTGKLR

iTrader: (20)

I don't know what's up with the search, but it shows me everything of the exact opposite of what I type. Go figure. Either way, i'm putting in a hot cam kit, and replacing everything on, or in the car. Was going to go ahead and slap on some new head gasets since my car has 167,xxx mi and i'm already there. The auto part store has a set for like 20 bucks a piece, and then a set for like 50 bucks a peice. You guys recommend any particular kind, I think those are Felpro. Thanks

Black1997T/A

I personally use Fel- Pro gaskets whenever I can use them. I've been in the field for 6 years and have never had a problem with them

MTBSully

iTrader: (7)

get some felpro 1074's on jegs or summit for like $36 a piece. Great set of gaskets and they will be at your door in 2 days

ss.slp.ls1

iTrader: (36)

Nothing wrong with felpro gaskets. You might want to look into running a cometic gasket to bump up your compression a little.

Badazz 97 TA

iTrader: (18)

you could also go to a dealer and get some '96 impala SS headgaskets. i think there .027 thick. i believe there around $60-80 bucks

95zpro

felpro#1074

Camaro_94

iTrader: (5)

Felpros.. Great stuff..

z_speedfreak

iTrader: (3)

x2 imp gaskets! bumps the compression up .5

slagger

iTrader: (1)

I have ran cometic on 2 motors and they are a little pricey but great head gaskets.

hvyss

The impala head gaskets are .029 thickness. I'd recommend those or the fel-pro 1074 at .039 thickness