rebuilt tranny having some problems
05-15-2009, 02:25 AM
#1
On The Tree
Thread Starter
iTrader: (3)
Join Date: Oct 2006
Location: St. Louis, MO
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
rebuilt tranny having some problems I just rebuilt my tranny and put a ls7 clutch in my car. I put in the clutch before the rebuild and put about 10 miles on the car when I noticed 3rd grinding and I lost reverse so I rebuilt the tranny. Everything went smooth with the rebuild and I put the tranny in the car tonight. Thats when everything went to hell. I went to test drive the car and I couldnt get it into anygear with the car off, so I started the car still nothing. But once I shut the car off Suddenly I could go through the gears. So I was like weird, but whatever. So I popped the car into reverse and started her up. The car was kindof shuddering a bit and jerkily trying to move but it was freakin me out so I just shut it off without giving it any gas and before I fucked anything up and pushed it back into the garage. Does ANYBODY have any idea what the hell could be wrong. I bought the car in october and really havent been able to drive it yet and its starting to **** me off
05-15-2009, 08:59 PM
#7
On The Tree
Thread Starter
iTrader: (3)
Join Date: Oct 2006
Location: St. Louis, MO
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
so should i start with bleeding the system or is the clutch bad? the clutch didnt do this when i first put it in, it started after i put the tranny back in. i guess air may have gotten into the system?
