monster81

its a 97 Camaro Lt1, i have a set of Weld pro star wheels 15x10 with 7.5 BS,,,ok so i know that i have to grind off the rear and front calipers, what else,what other mods are required??? btw im goin to have 325/50R15 tires...
thax

ndfrsd6

iTrader: (5)

well a BFH to knock the inner fender in lol....and trim your bumpers a touch, and possibly roll your fenders

jmm98LS1

iTrader: (28)

I had to hammer in the inner fenders, roll the fender lips, adjustable LCA's and grind the BEJESUS out of the calipers. Didn't touch the bumpstop or rear bumper.

Camaro396

iTrader: (14)

I didn't roll my fender lips, or do any trimming. But I did cut my bumpstops off, and pound pretty hard on the inner fenders. 15x10 with 7.5 backspace. No grinding, No spacers.

LS1BLKSS

iTrader: (36)

damn that looks bad ***!!!

Camaro396

iTrader: (14)

Thanks man!

monster81

how much to cut off the the bump stops ?

monster81

sorry for the dumb questions hehe,,but what do u guys mean by BFH and roll the fenders lips, anyone got pics so that i get an idea !!!

twitchtwice

iTrader: (12)

those are the first drag wheels that i actually like.

Danny2tek

iTrader: (1)

B ig
F u@^ing
H ammer

Theres a lip on the inside edge of your rear fender which could slice the tire.

monster81

waahahahaha ,,alright thanx Danny got it now

i think ill just go ahead and order the 325s ,,,ill post up pics asa i fit them on ,,,thax a lot for all the replys guys

monster81

thanks for all the info guys, her s what i did to fit em on

monster81

.....

ndfrsd6

iTrader: (5)

look good

Danny2tek

iTrader: (1)

I see you mastered the BFH mod

monster81

ndfrsd6: thax

Danny2tek: lol, thats right the BFH mod was like a heavy a## shoulder workout