Stock a4's in the 12's???
#1
12 Second Club
Thread Starter
Join Date: Oct 2008
Location: OREGON
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Stock a4's in the 12's???
Is there any bone stock or close to stock a4 Ls1's in the 12's out there? Soooo many think that 12's cant be done in a STOCK a4.....
#3
12 Second Club
Thread Starter
Join Date: Oct 2008
Location: OREGON
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
#4
#6
12 Second Club
Thread Starter
Join Date: Oct 2008
Location: OREGON
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
#10
12 Second Club
Thread Starter
Join Date: Oct 2008
Location: OREGON
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
#11
11 Second Club
iTrader: (21)
I have never seen a bone stock A4 let alone a M6 run 12s at my local tracks. Then again most drivers suck around here.
With a lid and FTRA I ran a 13.5 on a 100F day. With full exhaust, cutout, LS6 + prior mentioned mods I ran a 12.84@107.7 with stock 16s and street tires with a 1.999 goft...
It might be possible but I would say you're going to need some weight reduction with perfect air, elevation and 60ft...and thats a stretch
With a lid and FTRA I ran a 13.5 on a 100F day. With full exhaust, cutout, LS6 + prior mentioned mods I ran a 12.84@107.7 with stock 16s and street tires with a 1.999 goft...
It might be possible but I would say you're going to need some weight reduction with perfect air, elevation and 60ft...and thats a stretch
#15
11 Second Club
iTrader: (1)
Join Date: Jul 2006
Location: St. Louis, MO
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
I have a friend that went 13.01 with his bone stock T/A A4. As far as 12's stock in general, another friend of mine had an 02 Firehawk bone stock on street tires and a slipping clutch go 12.95. That run is on tape.
#16
12 Second Club
Thread Starter
Join Date: Oct 2008
Location: OREGON
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Its just some many guys put down the A4.... This "If its not a m6" attitude is BS. Ive owned both and loved them both But, the a4 in my opinion is better for drag racing... But some guys are just haters.
#17
Teching In
iTrader: (2)
Join Date: Oct 2007
Location: garland, tx
Posts: 46
Likes: 0
Received 0 Likes
on
0 Posts
i agree the a4 gets alot of hate. but my 02 z a4, with 3.42 lid, free mods went 12.98 at 106 and would regularly beat m6 cars on the hwy to about 130 ish.
then put pacesetters, slp dual dual, and tuned. 12.50s at 109. all this on cheap street tires.
then put pacesetters, slp dual dual, and tuned. 12.50s at 109. all this on cheap street tires.
#18
12 Second Club
I ran 12.95. My ONLY mods ar 3400 converter, K&N filter, and factory size M/T radials. Before the converter it ran a 13.3 and before the DRs it ran 13.5.
I love my A4 for drag racing. I use a weather computer and, with my curent setup, can typically dial in +-0.02. The last competition pass I was 0.001 off my dial.
I love my A4 for drag racing. I use a weather computer and, with my curent setup, can typically dial in +-0.02. The last competition pass I was 0.001 off my dial.
#19
9 Second Club
Join Date: Apr 2009
Location: Lake Tahoe, CA
Posts: 160
Likes: 0
Received 0 Likes
on
0 Posts
An M6 car can leave the line harder due to being able to launch @ a higher rpm. In the hands of an experienced driver you can go a lot quicker than a stock A4 car due to it's low stall speed from the factory. Once you throw a performance converter in the mix it's an entirely different story.
Last edited by ARCTIC '00; 06-02-2009 at 05:21 PM.