19BLACKBIRD99

I am wondering if this would be a good upgrade for my stock LS1??

conan

iTrader: (5)

Are you talking about a set of worked heads from a sponsor or just a stock set?

19BLACKBIRD99

Stock Set.

conan

iTrader: (5)

With your mods I would spend my money on a ls6 intake and cam. That would get you more power for your $$$ then just a set of stock heads. Just my $.02.

19BLACKBIRD99

Do you have a cam suggestion? and I wouldnt need to update my heads?

19BLACKBIRD99

I have heard about some cam only cars and they run pretty damn good lol

conan

iTrader: (5)

http://www.texas-speed.com/shop/item...d=167&catid=44

I had a TR224/568/112lsa cam with a ls6 intake and full exhaust before my current setup and made 396rwhp/383rwtq. The cam in the link is just a little bigger. Also one big thing I forgot... what transmission do you have?

19BLACKBIRD99

A4 lol

conan

iTrader: (5)

Well you'll need to match a stall for the cam. So if that's out you could go with a set of heads and the ls6 intake. How much $$$ are the ls6 head you were looking at.

19BLACKBIRD99

Around 700 bucks

conan

iTrader: (5)

For the $700 you might not be happy with the power per dollar ratio. If it were me I would put the 700 in to a set of ported heads
http://www.texas-speed.com/shop/item...id=84&catid=40
Whats you opinion on changing the converter?

19BLACKBIRD99

Well I was gonna but patriot extreme valve springs and ls7 lifters and hardend pushrods
and I was thinking a yank 3000 or 3500

ThunderStruk

iTrader: (1)

For $700 you could by a cam kit(cam/springs/pushrods) and make way more power than you will with a stock set of LS6 heads. If you are looking for something that makes really good power with great street manners, look at the TR224 or the TR230/224.

19BLACKBIRD99

If that will get me a reallllyyyy mean street car then I will go with thta lol

conan

iTrader: (5)

If your willing to change the converter I would go with the cam and intake and save up for some heads later down the road.

19BLACKBIRD99

i am willing lol

ThunderStruk

iTrader: (1)

If you change converters, that opens up a whole new window of camshafts you can look at. Just need to know what converter you are going to put in to know what cam will work with it.

19BLACKBIRD99

hmmm prolly a 3200 I saw one on the yank site

ThunderStruk

iTrader: (1)

PM sent