Spun Main bearing.
#1
10 Second Club
Thread Starter
Join Date: Mar 2002
Location: ATLANTA
Posts: 1,524
Likes: 0
Received 0 Likes
on
0 Posts
Spun Main bearing.
Well, I cranked my car up today leaving college and it starts knocking, luckily im close to my dads office so I head there and just before I get to his office it starts sputtering, surging, and then cuts off. Well I pull the dipstick and its grey oil and it looks like glitter was put in my oil. Needless to say I am looking into getting a new motor. I looked allot last night and I think I have narrowed it down between Agostino and Futral Motorsports (Price and word of mouth). I was thinkin I wanted to go big bore, but then I started doing the math and realized I just couldnt afford it. I am gonna go with a 346 I believe, but I have a few questions, if you had to pick between Agostino and Futral who would you go with. My mods are in the sig, Im lookin for a motor that is gonna stand up to the abuse i throw at it, and second most important, IT CANT SMOKE. I absolutely hate it when my car smokes, I dont want my car to smoke like a chinese ***** when I lay into it. I dunno if thats a stupid thing to be picky about, but I just hate it. I dont go to the track a whole lot, but I do race allot..........I just ordered a strange 12bolt with 4.30s so I want somethin to compliment that rear end nicely. My car made 437rwhp 410rwtq with my TEA heads. Any suggestions, ideas would be greatly appreciated. If any other sponsers read this and wanna shoot me a PM with a price on a 346 shortblock feel free too, im still open to other companys...............money in hand.
-Morgan
-Morgan
#2
TECH Senior Member
iTrader: (1)
Hint: If something goes wrong with the new motor, do you (1) Take it to Canada, or (2) Take it to Louisiana?
Do you see ARE over there on the sponsor list anymore? ---> They're not there for a reason...
FWIW. Between those 2, I'd choose Futral. No doubt about it.
-Andrew
Do you see ARE over there on the sponsor list anymore? ---> They're not there for a reason...
FWIW. Between those 2, I'd choose Futral. No doubt about it.
-Andrew
#3
TECH Apprentice
Join Date: Oct 2003
Location: Fort Davis TX
Posts: 353
Likes: 0
Received 0 Likes
on
0 Posts
I dont know if people over look TSP, but they have very reasonable engines, and Joseph is as top notch as they get if you ask me.
Might give Trevor or Jason a call.
But if you have Futral set then I have heard good things from them as well.
Might give Trevor or Jason a call.
But if you have Futral set then I have heard good things from them as well.
#4
Motorboater
iTrader: (53)
Let me suggest Speed Inc.
I couldn't be happier with my motor so far.
Tom will setup you up with exactly what you need and at killer pricing.
Shoot him email Tom@ls1speed.com
I couldn't be happier with my motor so far.
Tom will setup you up with exactly what you need and at killer pricing.
Shoot him email Tom@ls1speed.com
#5
Banned
iTrader: (1)
Join Date: Apr 2002
Location: Schaumburg IL.
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
We have had great luck with our Sportsman Mottors, here is the pricing:
SPORTSMAN SHORT BLOCK INCLUDES:
-Polished& refinished factory LS1 crankshaft
-Billet 6.125” connecting rods
-Diamond Flat top Piston w/2cc reliefs or -8.6cc Boost pistons
-Diamond Pro-select rings
-High performance bearings
-All Gaskets, seals and hardware for short block
-Fully balanced/blueprinted/Finish hone w/torque plate, assembled
$2799.99
We would need a good crank and block core.
Tom
www.ls1speed.com
1866-Ls1speed
SPORTSMAN SHORT BLOCK INCLUDES:
-Polished& refinished factory LS1 crankshaft
-Billet 6.125” connecting rods
-Diamond Flat top Piston w/2cc reliefs or -8.6cc Boost pistons
-Diamond Pro-select rings
-High performance bearings
-All Gaskets, seals and hardware for short block
-Fully balanced/blueprinted/Finish hone w/torque plate, assembled
$2799.99
We would need a good crank and block core.
Tom
www.ls1speed.com
1866-Ls1speed
#6
10 Second Club
Thread Starter
Join Date: Mar 2002
Location: ATLANTA
Posts: 1,524
Likes: 0
Received 0 Likes
on
0 Posts
Wow, as soon as I posted ARE, I got a phone call and several posts saying not to go with them, haha damn. Well, im not set on Futral, thats why I posted, Just wanted to see what some other sponsers could come up with, thats a really nice price from Speed Inc. as well!
Trending Topics
#9
Originally Posted by LS1 SPEED INC.
We have had great luck with our Sportsman Mottors, here is the pricing:
SPORTSMAN SHORT BLOCK INCLUDES:
-Polished& refinished factory LS1 crankshaft
-Billet 6.125? connecting rods
-Diamond Flat top Piston w/2cc reliefs or -8.6cc Boost pistons
-Diamond Pro-select rings
-High performance bearings
-All Gaskets, seals and hardware for short block
-Fully balanced/blueprinted/Finish hone w/torque plate, assembled
$2799.99
We would need a good crank and block core.
Tom
www.ls1speed.com
1866-Ls1speed
SPORTSMAN SHORT BLOCK INCLUDES:
-Polished& refinished factory LS1 crankshaft
-Billet 6.125? connecting rods
-Diamond Flat top Piston w/2cc reliefs or -8.6cc Boost pistons
-Diamond Pro-select rings
-High performance bearings
-All Gaskets, seals and hardware for short block
-Fully balanced/blueprinted/Finish hone w/torque plate, assembled
$2799.99
We would need a good crank and block core.
Tom
www.ls1speed.com
1866-Ls1speed
#14
Banned
iTrader: (1)
Join Date: Apr 2002
Location: Schaumburg IL.
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
I wouldnt want to give the next guy a crank that has been cut, so I cant take it as a goodc core.
We supply the parts and RGR does all of the machine work/assembley.
I have heard good things about Futral too.
Tom
www.ls1speed.com
We supply the parts and RGR does all of the machine work/assembley.
I have heard good things about Futral too.
Tom
www.ls1speed.com
#15
Super Moderator
iTrader: (9)
That is a great price from Speed Inc. It is hard to put together that combo for much less and still make a little money on it. I have built a few motors and can testify ot that. Not dinging the other sponsors either, as there are other great deals to be had from them.