johnLs1camaro

iTrader: (28)

I just switched from a dry kit to a wet kit. I could really find any good places to found my noids out now being I have an extra. Can some of you guys show me some pics of where and how you mounted your noids?

Purge question. Im hooking up my purge kit, just not for sure if I did it right.I have a T that connects to the purge and then the purge connects to the nitrous noid, and at the bottom of the T I have my main line that comes from the bottle, does that sound right? I can get pictures if you dont understand what im saying.

01SOMZ28

iTrader: (37)

i'll get some pics in a minute of my noids and my purge

johnLs1camaro

iTrader: (28)

thanks man.

JAX04

iTrader: (17)

this is where they are now, dont pay attention to the hoses, wasnt sure what to do with them at the time

01SOMZ28

iTrader: (37)

here are some shitty cell phone pics

heres a close up of how the purge is hooked up and also my electronic pressure gauge.

johnLs1camaro

iTrader: (28)

^ does your main line go into the nitrous noid or purge first, i couldnt really tell..

I like how you mounted them, i might try that.

JAX04

iTrader: (17)

main line into purge then purge into nitrous noid. i was told thats how its supposed to be, but looks like he did it defferent

johnLs1camaro

iTrader: (28)

^ ok cool thats what i thought but wasnt for sure.. I like how you had yours, but I have a lot of slack in my lines leftover, so the further away it the better.

JAX04

iTrader: (17)

well, im no expert, but ive always been told the closer the better, so if you could get your hoses shortened that would be best. but really i think dave told me as long as they are not longer the 12" away they should be fine, just what ive been told

johnLs1camaro

iTrader: (28)

yeah, your right the shorter the better.. I just ment with the slack i have with having it close it looks bad.. the further away it just looks better.

JAX04

iTrader: (17)

ah, tru dat. but like i say, if there is nitrous under the hood it looks good no matter what. lol

01SOMZ28

iTrader: (37)

with my setup the main line goes to the noid and the purge noid is the little black one on the right in that pic and the electronic pressure gauge is hooked on the left on the nitrous noid

JAX04

iTrader: (17)

did you just use a "T" when going into the noid then into the purge noid

01SOMZ28

iTrader: (37)

no, i used a fitting that was threaded on both sides and just fitted the purge noid on the right of the Nitrous noid and the nitrous line goes out the bottom of the nitrous noid, confusing? haha.

JAX04

iTrader: (17)

a little. lol. you went throught the noid bypass. lol, gott ya

johnLs1camaro

iTrader: (28)

[IMG][/IMG]

does this look right? if you look at the bottom of the page you see the feed line going into the T then you see the T going in the purge, then up on top you see the nitrous noid.

67goatman455

iTrader: (14)

yep thats right.

johnLs1camaro

iTrader: (28)

awesome thanks..

NVR_SPDS

iTrader: (39)

Heres a shot of my HSW Throttle Body bracket:

camscam02

iTrader: (21)

here is mine, the middle solenoid is for my second stage, havnt got around to get everything together yet for it.