Need fenders rolled in DFW
#1
TECH Enthusiast
Thread Starter
iTrader: (9)
Join Date: Dec 2004
Location: Charleston, SC
Posts: 584
Likes: 0
Received 0 Likes
on
0 Posts
Need fenders rolled in DFW
Does anyone roll fenders in DFW? I know i saw someone that rented out a fender roller at some point but i dunno if he's still doing that.
Trending Topics
#8
TECH Fanatic
iTrader: (27)
Join Date: May 2004
Location: DFW
Posts: 1,597
Likes: 0
Received 0 Likes
on
0 Posts
Just do it yourself… use a razor blade to “cut” a line in the paint near the edge of the fender lip. This will prevent your paint from cracking/flaking beyond the lip and up your fender, etc.
Get a baseball bat and a fat guy or several skinny guys to sit on the deck lid. Roll the bat. This will help get the lip started… once this is done, get a hammer and lightly tap, in small sections, the rest of the lip up. Go slow and in small sections. If you try to go buck wild you’ll leave dimple marks on the outside fender.
Not hard. Take your time and have some pleasure in knowing you did it yourself
Get a baseball bat and a fat guy or several skinny guys to sit on the deck lid. Roll the bat. This will help get the lip started… once this is done, get a hammer and lightly tap, in small sections, the rest of the lip up. Go slow and in small sections. If you try to go buck wild you’ll leave dimple marks on the outside fender.
Not hard. Take your time and have some pleasure in knowing you did it yourself