Why can`t i sell this nx maf system ??
#5
On The Tree
Thread Starter
iTrader: (17)
Join Date: Feb 2008
Location: the b inside the d!
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
http://www.jegs.com/i/Nitrous+Expres...09-10/10002/-1
If that link don`t work this one should. Also remember i have the second stage that has not been used and cost me $350 plus i have a purge so ya i have about $1,450 invested.
http://www.nitrousexpress.com/produc...ils.php?id=757
Thank you bodydropped
If that link don`t work this one should. Also remember i have the second stage that has not been used and cost me $350 plus i have a purge so ya i have about $1,450 invested.
http://www.nitrousexpress.com/produc...ils.php?id=757
Thank you bodydropped
Trending Topics
#8
no offense and not trying to kill your sale but your price is probably whats killing it the most. I know you have alot invested but you may be better off using it if you still can.
Just check out brand new kits from n2o outlet and HSW. You can get a complete plate kit with a controller for just over 500. It never seemed like the MAF kits were super popular even though I've heard they are great kits. But with the price of high quality kits coming down its killing the sale of high end used kits.
There are lots of nitrous kits in the classified right now if you do a search that haven't sold and some are priced in the 300 range.
Just check out brand new kits from n2o outlet and HSW. You can get a complete plate kit with a controller for just over 500. It never seemed like the MAF kits were super popular even though I've heard they are great kits. But with the price of high quality kits coming down its killing the sale of high end used kits.
There are lots of nitrous kits in the classified right now if you do a search that haven't sold and some are priced in the 300 range.
#9
TECH Senior Member
iTrader: (26)
with all the new affordable nitrous technology out, I think you may need to come down on price a bit. Plate or direct port setups are more desirable these days. Just my two cents...Imo normally your lucky to get 50% of what you got into anything thats used. I think 650.00 would get you more hits, good luck!
#12
TECH Enthusiast
iTrader: (19)
Join Date: Dec 2001
Location: deam land
Posts: 623
Likes: 0
Received 0 Likes
on
0 Posts
Just a suggestion. Remove all the lines for the solenoids, neatly fold the wires together and zip tie them. Try to present all the parts in an organized fashion. Put them on a table or clean surface and take some good pictures. First impressions will make a sale. 750 dollars is a lot of money and it's much easier for a buyer to purchase something if it looks like it has been well taken care of.
#15
I know some companies offer support for their products no matter who owns them but alot of them dont if you're not the original owner.
#16
11 Second Club
iTrader: (127)
Join Date: Jun 2002
Location: MS
Posts: 984
Likes: 0
Received 0 Likes
on
0 Posts
i sold a $1200 NX kit last year on here. ended up getting $500 for it. $300 less than my start out price. This year has seemed to be bad for nitrous. AS i was shopping for another kit for the past few months, i noticed that there is not a single KIT selling for over $300. Even on Ebay they were averaging $250-$350. People just aren't willing to spend A Lot of money on Nitrous right now for some reason...... i think it's the Forced Induction Fad goin on right now. Even I ended up goin with a used kit off Tech for $200Like previous posters stated, part it out. that's the only way the Big High Dollar kits are makin any money. GOOD LUCK.
#18
TECH Resident
iTrader: (1)
Join Date: Mar 2009
Location: Knoxville, TN
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking for a 78mm plate! I might consider a MAF style, though.
I have a WTB Ad here: https://ls1tech.com/forums/parts-wan...nos-plate.html
I have a WTB Ad here: https://ls1tech.com/forums/parts-wan...nos-plate.html