WhiteOak's LS1

Very long story, but basically, I'm getting a ms3 installed soon and have to drive it around for like a week or 2 untill i can get my torque converter installed. I'm wondering if it is going to be possible since i read soo many times "get the stall first"(dont flame me please,,long story)..Thanks in advance..

01ssreda4

iTrader: (96)

It will prolly want to push through the brakes. I say park it for the 2 weeks.

99FBODY

iTrader: (8)

I would also say park it. Just wait the two weeks and do them both together.

t/a98

iTrader: (6)

i planned on parking mine too (on stock converter) but then i moved it and realized it drove just fine, and the g6x3 is no small cam.... point is just try it and see what you think... mine does almost push but if i push the brakes pretty good it stays still

kons02Z28

i drove my car for about two weeks with ms3 cam and stock stall, it was pretty rough on the brake pads, i just two footed it around town,was very happy to get a stall after those two weeks of driving with out one

allbaugh_04

iTrader: (6)

It will be do-able, but based on what I've read, it's just not recommended and might be a pain, like kons02z28 is saying.

02*C5

iTrader: (1)

Always remember that anything that can go wrong probably will. I learned the hard way with my 1st H/C combo and couldn't wait for the stall eons ago. 2 weeks is not going to kill you not to drive it.

Good Luck

thunderstruck507

iTrader: (18)

give yourself plenty of stopping distance...its going to drive like **** and your brake power is going to be noticeably shitty

Trevor @ Texas Speed & Perf.

iTrader: (3)

It's doable, but it will certainly be a handful! Be careful, and I agree that you should give yourself plenty of stopping distance. It will really make you appreciate the stall once it's in.

Trevor
Texas Speed & Performance