all polished 2.8 kenne bell for sell
11-14-2009, 07:12 PM
#1
Launching!
Thread Starter
Join Date: Jul 2008
Location: cookeville, tn
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
all polished 2.8 kenne bell for sell I have a all polished 2.8 kenne bell set up with 8 rib set up. it has 60 inj in it. again all polished it has NO MORE than 2200 miles on it this is at the most. 100% all parts and booklet on the installing the unit. 6500.00 on all of the above. 
11-16-2009, 08:25 PM
#5
Launching!
Thread Starter
Join Date: Jul 2008
Location: cookeville, tn
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
This is a not so good quesion. if stock bottom end and only a 347 this unit is to big for your set up. you need a 2.6 kenne bell. But if you looking at going motor size of 402 are biggher it will work. So back to you on a non forged bottom end 9 psi would be the max and to really keep it safe. on a forged bottom end 18 to 20 psi.
Trending Topics
11-16-2009, 09:29 PM
#9
Launching!
Thread Starter
Join Date: Jul 2008
Location: cookeville, tn
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
Yes the kenne bell will not fit under a stock vette hood. you can get one 699.00 shipped to you in the lower 48..... if you buy the set up from kenne bell 9500.00 but that is hood and shipping to you.... That is all polished unit.
11-18-2009, 11:21 AM
#10
Launching!
Thread Starter
Join Date: Jul 2008
Location: cookeville, tn
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
11-18-2009, 04:50 PM
#12
Launching!
Thread Starter
Join Date: Jul 2008
Location: cookeville, tn
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
Thanks man good too see a friendly person over here. How is the car doing man. I got a 30 day vacation over there. I wish I could sell this kenne bell. Going too lose my azz on it. If anyone want low too mid 600 rwhp and alot of blink. you need this kenne bell.....
11-20-2009, 12:21 PM
#13
12 Second Club
iTrader: (13)
Join Date: Nov 2004
Location: 707
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
I'm driving a 2002 Z06 with 12k miles. It has headers, corsa cat back, Black wing and a few other little things. You got kicked off CF? C'mon, for real? Heres a pic of my car, I wish I had the money for your blower. Times are getting rough up here in Ohio.
11-21-2009, 04:02 PM
#18
Launching!
Thread Starter
Join Date: Jul 2008
Location: cookeville, tn
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
11-27-2009, 10:02 PM
#19
Launching!
Thread Starter
Join Date: Jul 2008
Location: cookeville, tn
Posts: 249
Likes: 0
Received 0 Likes
on
0 Posts
ttt Lets try this, Has all the parts for the set up as far as the unit itself goes. Also I have the latest idler pulley for the set up 8 rib. You will need to get the alt and bal pulley set up. Let try 5500.00 for the above, This unit is like new. Also have the booklet on this to go with the sell.....
11-28-2009, 04:02 AM
#20
Teching In
Join Date: Jul 2009
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Bump for a good guy and a killer deal. Folks you won’t find any better deal on a KB and you won’t find anyone more honest. Example: just read post #5 of this thread, he kills a potential sale. Robert just wanted absolute insane power. Someone will make a very good buy.